Table of Contents
Advertisement
Viewing the Display Screen
This list identifies the symbols you'll see on your display screen:
Shows your current signal strength.
The more lines you have, the stronger your signal.
Means your phone cannot find a signal.
Tells you a call is in progress.
Indicates you are "Roaming"off the enhanced
Sprint Nationwide PCS Network. (If you are roaming on an
analog system, your phone displays the
icon and an
"Analog Roam"text alert. If you are roaming on a digital
system, your phone displays the
icon and a "Digital Roam"
text alert.)
Indicates you have new text messages.
Indicates you have voicemail messages.
Press
or press and hold
to call your
voicemail.
Indicates you have new text + voice messages.
Indicates you have urgent messages.
Battery charging level – the more blocks, the stronger the
charge.
Indicates that the phone is in Auto Answer mode.
Indicates that the phone's microphone is muted (the caller
cannot hear you or any sound from your side, though you can
still hear his or her voice).
Indicates the Location Service of your phone is enabled.
Indicates the Location Service of your phone is disabled.
Indicates Sprint PCS Vision access is active.
Indicates your phone is receiving data.
Indicates your phone is transmitting data.
Indicates Sprint PCS Vision access is dormant.
Indicates Sprint PCS Vision access is unavailable.
Appears when either an event or an alarm is set.
Appears when "High&Vibrate"is selected as the ring mode.
Appears when a "Ringer"is selected as the ring mode.
Appears when "Vibrate On"is selected as the ring mode.
Appears when "Ringer Off"is selected as the ring mode.
Appears when "Silent All"is selected as the ring mode.
Indicates your phone is in TTY mode.
Indicates TTY mode is off.
Indicates an emergency call is in progress.
Indicates that a headset is connected.
Indicates your phone is locked.
Section 2A: Your Sprint PCS Vision Phone – The Basics
10
Advertisement
Table of Contents
