EnGenius ENS620EXT User Manual page 18

To attach the AP to a wall using wall mounting
kit.
1. Determine where the Access Point to be placed and
mark locations on a surface for the two mounting holes.
Use an appropriate drill bit to drill two 8.1mm diagram
and 26mm depth holes in the markings and hammer the
bolts into the opening.
2. Screw the anchors unto the holes until they are flush
with the wall.
2
3
1
3. Screw the included screws into the anchors.
4. Place this Access Point against wall with the mounting
heads.
18
4