Base Stand Assembly Instruction - Haier LE32B8500T Owner's Manual

Introduction

Base Stand Assembly Instruction

1. On each desk stand, identify the longer leg of
the stand, and slide the rectangular section of
the desk stands into the TV so that the longer
leg is facing towards the front of the TV.
INSTALLATION NOTES
Locate the TV in a room where light does not strike the screen directly. Total darkness or a
reflection on the screen can cause eyestrain. Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Please do not attempt to rotate the TV on the stand.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
07
2. Insert the long screws into the holes in the
rear of the TV that line up with the holes in the
rectangular section of the metal desk stands,
and tighten the screws firmly. You may need to
slightly jiggle the metal base stands around in
their holes to allow the screws to be correctly
seated prior to being tightened.
(32"/42")
M4X26MM