Table of Contents
Advertisement
SECTION X.
AUTOMATIC COUNTDOWN CYCLE (OPTIONAL)
There is a 4-position configuration switch (designated S2) located on the Receiver circuit board. This switch
can be used to set a countdown cycle (time-out feature) for the Spa and/or Aux1 circuit. Once this feature has
been enabled, the equipment will automatically turn off after the countdown cycle irrespective of how the circuit
was turned on (by Indoor Remote, Spa-side Remote or Hand-held Remote).
Use a paper clip or other blunt instrument to slide the appropriate switch at S2 to the "ON" or "OFF" position,
in accordance with the following pictorial:
Rev. D 2-19-04
5
P/N 520041
Advertisement
Table of Contents
