Page 1
ITEM / ARTICLE / ARTICULO # 248906 7.2V CORDLESS SHEAR MODEL / MODELE / MODELO #24053 CAUTION - FOR YOUR SAFETY READ YOUR OPERATOR’S MANUAL COMPLETELY AND CAREFULLY BEFORE ATTEMPTING TO SET UP OR OPERATE YOUR NEW POWER TOOL. ALL OPERATORS OF THIS EQUIPMENT SHOULD READ AND UNDERSTAND ALL SAFETY RULES PRINTED ON THE MACHINE AND IN THIS OPERATOR’S MANUAL BEFORE USE.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. These safety instructions are not meant to cover every possible condition that could occur. If you have any questions regarding the product please call customer service at 1-877-444-6742, 8:00 a.m.- 6:00 p.m., EST, Monday-Thursday.
Page 4
SAFETY INFORMATION WARNING READ AND UNDERSTAND ALL INSTRUCTIONS. Failureto follow all instructions listed below may result inelectric shock, fire and/or serious personal injury. Work Area • Keep your work area clean and well lit. • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, ordust. Power tools create sparks which may ignite the dust or fumes.
Page 5
SAFETY INFORMATION For ALLGarden Tools •Avoid dangerous environment. Don’t use tool in damp or wet locations. •Don’t use in rain. •Keep by standers and children away while operating. •Dress properly. Do not wear loose clothing or jewellery.They can be caught in moving parts. Use of rubber gloves and substantial footwear is recommended when working outdoors.
Page 6
SAFETY INFORMATION WARNING READ AND UNDERSTAND ALL INSTRUCTIONS.Failure to follow safety rules listed below may result inelectric shock, fire, and/or personal injury: • Do not abuse the cord. Never use the cord to carry the tool. Never pull on the cord to remove the plug from the power outlet.
PACKAGE CONTENTS By purchasing a battery-powered tool you have helped reduce the pollution level of our environment. Please check the contents of the carton below. Examineall the parts before using the cordless Shear and battery charger. WARNING To reduce the risk of fire, electric shock, and personal injury: •...
KNOW YOUR 7.2V CORDLESS SHEAR Handle Blade Sheath Lock-off button Trigger switch Wheels Pole Cutting blade Plug Battery charger Connector OPERATING INSTRUCTIONS Blade Sheath Fig. 1 Install the blade sheath (Fig. 1): 1. Align the blade sheath (2) with the cutting blades (1) on the shear.
Page 9
OPERATING INSTRUCTIONS INSTALL WHEELS Fig. (3) 1. Thread wheels and the shaft (1) in to grass shear body. 2. Screw with another wheel (2). EXTENSION HANDLE Fig. (4) 1. Install the handle. 2. Press the lock button (2) and push the handle firmly into the shear (1).
THE BATTERY CHARGER Charging Procedure (Fig. 5) The Shear is not shipped fully charged. The Shear requires charging before using the for the first time. The charger requires no adjustment or settings. Fig. 5 1. Plug the charger into an AC power outlet. 2.
ENVIRONMENTALLY SAFE BATTERY DISPOSAL The following toxic and corrosive materials are in the batteries used in this battery pack: Cadmium, a toxic material. WARNING All toxic materials must be disposed of in a specified manner to prevent contamination of the environment. Before disposing of damaged or worn out nickelcadmium battery packs, contact your local waste disposal agency, or the local Environmental Protection Agency for information and specific instructions.
REPLACEMENT PARTS LIST Item Name Item Name handle button spring blade cover trigger switch louck off button blade trigger switch board cover switch board wheel insulated line right shell battery pole tie-in motor spring button left shell switch middle cover spring axle pole pin...