Page 1
Bella TECHNICAL SPECIFICATIONS (ND-8000) Name: uKnead Bella Massage Chair Rated Voltage: 110v User Manual Rated Frequency: 50/60hz Safety Design: Class I Manufacturer Reserves The Right To Make Changes T o Information Published In This Document, Including Without Limitation Specifications And Product Descriptions, At Any Time And Without Notice.
Congratulations on purchasing the uKnead Bella massage chair. Please read and follow IMPORTANT SAFETY INSTRUCTIONS all safety and operating instructions listed in this user manual prior to use. Basic precautions Please read and follow the instructions given below. Failure to comply may result in the risk should always be used when operating an electrical appliance.
Page 3
4.Use this appliance only for its intended use as described in this manual. Do not use 16.Move massage chair only when necessary and always handle with care when moving attachments not recommended by the manufacturer. the backrest and leg rest to prevent damages. 5.Please do not use replacement parts from an unauthorized dealer or service provider.
Page 4
Safety Precautions Medical Conditions 1.Do not use massage chair in combination with other therapeutic appliances as this may Please consult your physician prior to use if you: result in ineffectiveness or injury. Are under medical rest Have spinal disorders, an abnormal spinal condition or have suffered a spinal injury 2.Do not use massage chair for one hour prior or after dining.
PRODUCT COMPONENTS PRODUCT COMPONENTS Head Cushion Shoulder Air Cells Ambience Lighting Retractable Shoulder Air Legrest Cells Massage Rollers Arm Air Cells Heated Backrest Calf Air Cells Foot Air Cells Rear Cover Shiatsu Foot Rollers Power Cord Socket...
REMOTE CONTROLLER OPERATION GUIDE Powers on/off the massage chair Auto Programs Press to select from 5 preset automatic programs: Relax, Extend, Zero Gravity, Neck & Shoulder, Back & waist. Press repeatedly to switch programs in the above order. Relax: Energizing massage routine suitable for morning and daytime use. Extend: Vigorous stretching program to relax tight muscles.
Page 7
OPERATION GUIDE OPERATION GUIDE Press to increase or decrease massage roller speed with 6 levels to choose from Press and hold to raise the footrest higher Increase or decrease foot roller speed, select from 6 levels Press and hold to lower the footrest Press and hold to ascend the backrest Press to select intensity level of the overall air massage, Press and hold to recline backrest.
INSTALLATION GUIDE INSTALLATION GUIDE If one s doorway is exceptionally narrow, and the chair cannot fit through fully assembled. Please follow the instructions below to remove the left arm panel to Step 1: Remove the massage chair from the carton allow for fitment through tight spaces.
Page 9
INSTALLATION GUIDE INSTALLATION GUIDE Gently lift and pull the arm panel upward. After chair has been moved into permanent location, follow instructions to reinstall the arm panel. Make sure the air First, securely attach the power cord to tubes are not crushed when reinstalling the the socket at the base of the chair.
Please make sure there is enough space infront as well as behind the chair for reclining. mechanism can retract safely. The Bella requires 18 (45cm) behind the chair, and 26 (65cm) infront of the chair to operate.
Massage program froze Software crash again after 30 seconds Please use care in operating the massage chair. uKnead will not be held liable for bodily or mechanical damages arising from failure to follow outlined instructions and improper operation of massage chair.
Need help?
Do you have a question about the Bella and is the answer not in the manual?
Questions and answers