Page 2
Introducing the ACU-M System The ACU-M system helps with assessing and tuning the energetic state of the human body. It utilizes the experience of the Chinese medicine and at the same time it follows the methodology elaborated by Willy Penzel during the last century.
Page 3
USB key into a free USB slot for the system to identify the device. 2. The USB key is named ACU-M. In it’s base folder launch SETUP.EXE. You can launch this program also from a different location. The installation does not require the ACU-M USB key to be inserted.
Without the USB key the program runs in the DEMO mode with limited functionality. Registering the Program 1. When launching the ACU-M program with USB key attached the following dialog is displayed: 2. Select the Settings / About...
Page 5
Settings / Settings tab. You can also check whether the converter installed successfully – the connection parameters are shown in the window below the Find the ACU-M button. Please note: Should the parameters not be displayed even after pressing the...
Page 6
Here you can also check a successful installation of the converter – the connection parameters are shown in the box below the Find ACU-M button. It I recommended to perform the calibration after each environment change (ambient temperature, humidity).
Page 7
Safety notes Operating instructions Before use, ensure that there is no visible damage to the unit or accessories. • Using the unit is not a substitute for consultation with and treatment from a physician. • Whenever you have any pain or illness, always contact your physician first. •...
Need help?
Do you have a question about the ACU-M and is the answer not in the manual?
Questions and answers