Download Print this page

Advertisement

Quick Links

一、
配件清单
感谢您购买 WiFi iData,请确认您的包装中包含以下配件:
一台 WiFi iData;
一条 USB-Micro USB 线;
一份使用说明书;
一份保修卡。
1. Accessories list
Thank you for your purchasing our WiFi iData, please confirm your packing including the following
accessories:
One WiFi iData
One USB-Micro USB wire
One operation instruction
One warranty card
二、WiFiiData 总览
2. WiFi iData Pandect
状态灯
Status light
Micro SD 接口
Micro SD connector
开关机、充电及恢复出厂设置
2.
On-Off, Charging, Restore Factory Settings
开机
Power On
WiFi iData Operation Instruction
执行的操作
Action
WiFiiData 使用说明书
Micro USB 接口 Micro USB Port
RJ45 接口 RJ45 Port
USB 接口 USB Port
详细说明
Detail despription
在关机状态下,按下开关 1 秒,绿灯亮,已开机;
In shutdown mode, press the switch for 1 second.
开关 switch

Advertisement

loading
Need help?

Need help?

Do you have a question about the iU-01W and is the answer not in the manual?

Questions and answers

Summary of Contents for DeLUX iU-01W

  • Page 1 WiFiiData 使用说明书 WiFi iData Operation Instruction 一、 配件清单 感谢您购买 WiFi iData,请确认您的包装中包含以下配件: 一台 WiFi iData; 一条 USB-Micro USB 线; 一份使用说明书; 一份保修卡。 1. Accessories list Thank you for your purchasing our WiFi iData, please confirm your packing including the following accessories: One WiFi iData One USB-Micro USB wire One operation instruction One warranty card...
  • Page 2 When it is charging, the status light keeps red, when the battery become full, the status light turns green. 恢复出厂设置 连续按开关 10 秒 Restore Factory Setting Keep press the switch for 10 seconds. 四、基本规格参数 型号 iU-01W Model 尺寸 88*58.6*15MM Size 重量 70±1g Weight 颜色...
  • Page 3 b. 按下 WiFiiData 电源开关,状态灯绿色为开机; B) Press the switch for 1 second to open the device. The device is ON when the status light turns green. c. 使用移动设备如 iPhone,iPad 的设置中打开 WiFi 开关找到 WLAN,选择用户命为 WiFiiDataXXXX(为了 保证产品的唯一性,XXXX 是动态产品标识,每个产品可能不一样),输入密码(默认密码 12345678) ,然 后点击连接; C) Open WiFi in the mobile devices such as iPhone, iPad, search the WLAN from settings, choose WiFi iData XXXX (To assure product’s uniqueness.
  • Page 4 *主界面的视频、音乐、照片、文件夹默认的是本地存储区的。 Video, music, picture, file in user interface is acquiescent to be stored in local storage area 建议采用 CLASS6 以上速度的 MICRO SD 卡,否则播放 WIFI IDATA 中的视频时,可能会出现播放不连续的 现象。 Please use the Micro SD card with Class 6 speed or higher, otherwise the vedio in the WiFi idata will be discontinuous while playing.
  • Page 5 2. This version only can copy the file, not folder currently. 3. Please charging the WiFi iData in time, otherwise the transmission speed and work efficiency will be affected. 图 1 图 2 (选择要复制的文件) (已复制到本地存储区) 2. 通讯录的备份与恢复 Contacts back up and recover a.
  • Page 6 Click “recover”, the interface will show the latest 4 times backup contacts, click the contacts you need to recover, the contacts will be recover to the mobile device which is connected with WiFi iData. 备注: *通讯录备份,此软件默认备份至 Micro SD 卡,若您要进行通讯录备份时,请确保已插入 Micro SD 卡。 *系统保留的是最近...
  • Page 7 (2)界面图标功能介绍 Icon function introduce 点击这个图标,可以进入 3G 的配置页面 Click this icon, then enter the 3G settings page. 点击这个图标,可以浏览,播放移动存储设备上的多媒体文件 Click this icon, you can scan, play the multimedia from mobile storage device 点击这个图标,可以进入到 WiFi 的安全设置界面,完成 WiFi 密码的修改 Click this icon, you can enter into WiFi safe settings to complete the modification of WiFi code. 点击这个图标,可以进入到路由器的高级设置界面,可以对路由器进行更多的功能设置,例如固...
  • Page 8 Click this icon, the PPPOE dial internet settings interface will appear at the bottom of the page. If you don’t connect with internet by wired or dial, then key in PPPOE’s user and code, then click “yes” to finish the setup. Otherwise click the “cancel”. 点击这个图标,页面下方将弹出静态...
  • Page 9 * 1.本机缺省的拨号参数仅针对中国大陆 3G 运营商,香港,台湾地区和其他国家请以当地 ISP 商提供的参数为准, 因此,中国大陆以外的用户需要将 3G 设置界面中的“拨号参数”由“缺省”设置为“自定义”,然后在展开的设置界面 中,继续填入当地 ISP 商提供的拨号号码、APN 用户名及密码等信息,最后点击“确定”按钮完成设置; 2. 我们不能排除这一状况的出现,即目前在支持列表中的 3G 网卡型号可能在将来因生产商调整产品内部参数而 导致不能被本设备支持。 Remark: 1. This product default only refers to 3G operator in mainland, China. Please refer to local parameter provided by local ISP operator for HK, Taiwan area or other countries. Therefore, the user out of China mainland need set the “dial parameter”...
  • Page 10 If internet suppliers offer the stastic IP as access way, you need key in ISP or IP address, subnet mask, gateway, DNS server, backup DNS server offered by internet administrator. b. 动态 IP 如果网络提供商提供给您的接入方式为动态 IP,此处您不需要进行任何设置,直接点击“确定”。动态 IP 是 宾馆和酒店等公共场所常用的上网方式。 Dynamic IP If the internet supplier offer you dynamic IP as access way, you don’t need do anything just click “confirm”.
  • Page 11 click ”confirm” (5) WiFi 无线网络的基本设置及安全设置 a.点击“高级设置”图标进入路由器高级设置界面,点击左侧 “无线网络设置” -> “基本设置”,您可以进行网络模式、 SSID、无线信道等基本的无线网络设置。 b.路由器的出厂设置的 WiFi 密码比较简单,请在第一次使用本产品时,记得修改 WiFi 的密码,以保证数据的安全 性。点击“WiFi 安全”图标,进入到 WiFi 安全设置页面。 WiFi wireless internet basic and security settings a, Click “advanced settings” icon to enter router advance settings interface, click “ wireless internet settings-basic settings”...
  • Page 12 *1.为了保证您的无线网络不被他人非授权访问,建议设置无线加密,推荐加密方式为 WPA-PSK/WPA2-PSK。 2.进行无线网络 SSID、加密设置后,请重新进行无线连接,WiFi 密码为新设置的密码。 1. To ensure your wireless internet will not be no authoritative accessed, please setup Wireless Encryption. Recommended encryption is WPA-SK/WPA-2-PSK. 2. After wireless internet SSID, encryption setting, please connect wireless again. The WIFI code was the new one. 4.应急充电...
  • Page 13 (2)WiFiiData 给安卓手机等移动数码设备进行应急充电; 操作步骤: a.打开 WiFiiData 开关; b.用一根 USB-Micro USB 线材,建议用 WiFiiData 配送的线材,USB 一端插 WiFiiData 的 USB 接口,Micro USB 插安卓手机或其他移动互联产品对应的接口,然后插上电源即可充电。 (2)Charging android phone Operating steps: A, turn on the WiFiiData b. Please use USB-Micro USB connecting line (advise to use original connecting line provided by us) to connect with WiFi iData and android mobile phone or other mobile internet products to complete charging.
  • Page 14 6.Card reader When you use Micro USB connect with computer to charge WiFi iData, it can be used as card reader at the same time. Put the Micro SD card into WiFiiData to realize the data transmission between computer and Micro SD card.
  • Page 15 FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.