Engineering Labels For Subscriber Cables; Figure A-15 Example Of The Label On The Trunk Cable Between The Device And The Ddf; Table A-8 Information On Labels Affixed To The Subscriber Cables - Huawei Quidway S8500 Series Installation Manual

Installation Manual
Quidway S8500 Series Routing Switches

Figure A-15 Example of the label on the trunk cable between the device and the DDF

"A01-03-01-01-R" indicates that local end of the trunk cable is connected with the
receiving terminal of Trunk Cable 01 in Slot 01, Frame 03 of the cabinet on Row A,
Column 01 in the machine room.
"DDF-G01-01-01-AR" indicates that the opposite end of the trunk cable is connected
with the receiving terminal of Direction A (connected to optical network equipment) on
Row 01, Column 01 of the DDF on Row G and Column 01 in the machine room.
A.6 Engineering Labels for Subscriber Cables
The labels are affixed to both ends of the subscriber cables to identify the position of the
cables on the device side and the Main Distribution Frame (MDF) side.
I. Meaning of the label
Table A-8 shows the information on both sides of the labels affixed to the subscriber
cables.

Table A-8 Information on labels affixed to the subscriber cables

Content
MN-B-C-D
MDF-MN-B
-C
Meaning
MN: cabinet number
B: frame number
C: physical slot number
D: cable number
MN: row number and column
number of MDF
B: row number of
terminal
C: column number of the
terminal
Huawei Technologies Proprietary
A-17
Appendix A Engineering Labels for Cables
Example
For example, A01
Numbered in bottom-up order with
two digits, for example, 03
Numbered in top-bottom and left-right
order in two digits, for example, 01
Numbered in top-bottom and left-right
order with two digits, for example, 01
Numbered in the same rule as that of
the cabinets, for example, G01 means
the MDF of Row G and Column 01
the
Range from 01 to 99, for example:
01-01