CCTV PTA1318X User Manual

Auto-tracking speed dome

Advertisement

Quick Links

Solemn Declaration
While writing this manual, we've been very cautious and prudent in order to guar-
antee the credibility of all the information provided here. However, if there exists any
error, your precious advice and correction will be greatly appreciated. Meanwhile, the
misinterpretation of this manual is not controllable, so we are not responsible for the
accidents and the damage caused by misunderstanding this manual, the damage to the
third party and thereby the compensation claimed by the third party and the deletion
and loss of information and thereby other indirect loss caused by incorrect software op-
eration, maintenance or other accidental situations.
The distribution and marketing must be conducted by the original purchaser un-
der the items of permission agreement. No company or individual is allowed to copy or
duplicate the whole or part of this product, or convert it into other electronic media read-
able by other machines.
Any modification of the manual is not likely to be otherwise stated.
Please base on the software when any mismatch for this manual caused by soft-
ware upgrading occurs.
Please read the user's manual carefully before using the product.
Make sure that your operation is complied with the operation procedure.
Please read the manual in detail before using the product!
Please obey all the rules of operation!
AUTO-TRACKING SPEED DOME
USER'S MANUAL
Speed Dome of Security & Safety of CCTV System

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PTA1318X and is the answer not in the manual?

Questions and answers

Summary of Contents for CCTV PTA1318X

  • Page 1 Please read the user’s manual carefully before using the product. Make sure that your operation is complied with the operation procedure. Speed Dome of Security & Safety of CCTV System Please read the manual in detail before using the product!
  • Page 2: Table Of Contents

    Contents Part.1.Notice ..............4 Part.2.Product Features..........4 Part.3.Function Description........5 Part.4.Technical Parameters........7 Part.5.Installation Preparation........8 Part.6.Installation Guidance............8 1.Dome-Insert Installation ................8 2.Ceiling—mounted Installation.................9 3 . Wall -hu n g In stal lati on..............1 0 4. Pillar Installation of Dome..................11 5.Lifting Installation of Dome..................
  • Page 3: English Menu Index

    CCTV SYSTEM 18.Preset Settings....................27 Address Switch Address Switch 19.Auto Tour Settings....................28 Address Address 20.Limit Scan Settings....................29 Code Code 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 21.Pattern Scan Settings....................30 1 1 0 0 0 0 1 1 0 1 0 0 0 1 1 1 22.Zone Indication Settings....................31...
  • Page 4: Part.1.Notice

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 Part 1 【Notice】 Address Switch Address Switch Address Address Code Code 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 1 0 1 1 1 1 0 1 1 1 1 1 0 0 1 1.Handle with care while transportation.
  • Page 5: Part.3.Function Description

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 power-off. Address Switch Address Switch Address Address Precision stepper electrode drive smooth operation, accurate positioning ◆ Code Code 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Infinitely variable speed Continuous 360°pan, tilt turning(180°...
  • Page 6 CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 Part 11【code Switch setting table 】 To set the starting point of limit scan by using the start command in the control keyboard, and then use the joystick to move to the end point of limit scan at a certain speed. After calling the limit scan, camera will auto- 1.SW2 IP address setting table...
  • Page 7: Part.4.Technical Parameters

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 4.Problems in practical use : Part 4【Technical Parameters】 In the real construction, user often adopts y-junction connection mode whose terminal impedance ◆ are connected between the two farthest equipments (as B and D in figure 21). But it doesn’t comply...
  • Page 8: Part.5.Installation Preparation

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 Part 5【Installation preparation】 Part 10【Common Knowledge on RS485 control bus】 1.Basic requirements ◆ All electrical work should comply with the latest local electrical regulations, fire-proof pre cautions and 1.Basic features of RS485 control bus :...
  • Page 9: Ceiling-Mounted Installation

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 Step b. Install ceiling mount Part 9【Simple Trouble Shooting】 (1) First, keep pushing the ceiling mount into the hole in the ceiling until the mount is totally inside the hole. Second, unfold the three brackets and screw them up.
  • Page 10: Wall -Hu N G In Stal Lati

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 4.Auto-Tracking Function Express Step b. fix ceiling mount There are two connection ways: One is from center hole, the other is from the hole beside Preset NO. Speed dome / camera control content Call preset Set preset ⑴Make sure the installation position and the connection way.
  • Page 11: Pillar Installation Of Dome

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 Step c. Set speed dome Dome Controlling Function Express (1) Set (DIP switches) SW2 under the bottom of dome machine Preset Set preset Speed dome / camera control content Call preset to control speed dome IP address.
  • Page 12: Lifting Installation Of Dome

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 1. Dome function Express 5、Lifting installation of dome: Step a Drill holes on the ceiling Preset NO. Speed dome / camera control content Call preset Set preset (1) Take the holes of the ceiling base as a template and mark the ¤...
  • Page 13: Part.7. Menu Setting Of Osd System

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 23.Auto-tracking settings Part 7. Menu Setting of OSD System PRESET POS SETTINGS NO<1-90:151-254> :001 1, tracking sensitivity DATE TIME TITLE :POS001 MAIN MENU P/T POS Auto-tracking can be set to low ,medium, high sensitiv-...
  • Page 14: Basic Operation

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 22.Zone Indication Settings MAIN MENU Regional indicator refers to when a user control rocker control ball machine rotates to the region a preset range, the 2.Basic Operation <SYSTEM SETTINGS> screen display area title set in different regions, conven- ient user identification in the field of view.
  • Page 15: Power-On And Self-Check

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 The position of the equipment information is displayed on monitor as follows: 21.Pattern Scan Settings Aram display MAIN MENU Dome Title display 1.Set pattern scan number Pan and Tilt angle Move the cursor to “number”, or press [OPEN/ IRIS ON] <SYSTEM SETTINGS>...
  • Page 16: Restore Factory Settings

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 5. Language& Video &Position Display Settings 20.Limit Scan Settings MAIN MENU On the system info, user can set the OSD menu , video format, the position of menu, date & time , soft address, protocol, baud rate, check the speed dome...
  • Page 17: Date&Time Settings

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 7. Date and Time 19. Auto Tour Settings MAIN MENU The speed dome has the function of the time and date display, The user can change the date and time by speed dome menu, the way as <SYSTEM SETTINGS >...
  • Page 18: Menu Password Protection Settings

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 8.Menu Password Protection Settings 18.Preset settings There is no limit permissions set to modify the speed MAIN MENU dome system, the password can protect the speed dome. When open MAIN MENU the speed dome , the users need input the password.
  • Page 19: Communication Settings

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 9.Communication Settings 17.Privacy Masking Settings ( need camera support) MAIN MENU Address configuration:Hardware or software configuration. MAIN MENU 1.Set Privacy Masking NO. 1.Software configuration <SYSTEM SETTINGS> Move cursor to [ Number], turn joystick right, the setting area display Set method: Move cursor to “address configuration”, turn joystick...
  • Page 20: System Other Settings

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 16.Alarm Settings 10.Other System Settings MAIN MENU The speed dome can support 4 channel alarm input,1 channel 1.Pan start Temperature output, realize alarm linkage. MAIN MENU <SYSTEM SETTINGS> Users can defined the pan start temperature by menu, the de- <CAMERA SETTINGS>...
  • Page 21: Camera Settings

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 15. IR Light 11.Camera Settings Through the infrared settings menu, user can set the infrared lamp MAIN MENU MAIN MENU working mode . Users can adjust the camera parameters by menu.( the adjust- <SYSTEM SETTINGS>...
  • Page 22: Display Settings

    CCTV SYSTEM IR Intelligent Speed Dome Operation Manual ver2.0 13. Dome Title Display Set 104 and exit to camera zooming settings MAIN MENU User can set dome title by menu, the tile can display on screen to discriminate every monitory point, title together with <...

Table of Contents