Table of Contents
Advertisement
While all the necessary adjustments and controls for the television are made using the remote control,
the buttons on the television may be used for some functions.
Common Interface
USB
HDMI 2 INPUT
SOCKET
Power
Up / down
(Volume or channel)
Programme / Volume / Source
Headphone
For 32AV93*B | 32/40LV93*B
Switching On
If the RED Stand By LED is unlit, check that
the plug is connected to the power supply. If
the picture does not appear press
remote control, it may take a few moments.
To put the television into Standby press
the remote control. To view the television press
again. The picture may take a few seconds
to appear.
For energy saving:
We recommend that you use the television
with the factory settings. The factory settings
are for energy saving.
Unplugging the mains plug will cut energy use
to zero for all televisions. This is recommended
when the television is not being used for a long
time, e.g. when on holiday.
Reducing the brightness of the screen will
reduce energy use. Energy efficiency cuts
energy consumption and thus saves money by
reducing electricity bills.
NOTE: Putting the television into standby
mode will reduce energy consumption,
but will still draw some power.
Using the Controls
Programme / Volume / Source
GREEN LED − On Timer
RED LED − Standby
GREEN LED − Power on
IR SENSOR
To set up the television you will now need to
use the on screen menus. Press MENU on the
on the
remote control to see the menus.
The on-screen menu appears as a list of five
topics. As each symbol is selected by pressing
on
◄ or ► on the navigation ring on the remote
control.
To use the options, press
menu. Then press ▲ or ▼ on the navigation
ring to move up and down through the menu
and use
low the on-screen instructions. The functions of
each menu are described in detail throughout
this manual.
Press
Press
then press
Press and hold
played, then press
list until desired input source is located.
Please always refer to the user manual of the
equipment to be connected for full details.
NOTE: Inserting the headphone plug will mute
15
Common Interface
USB
HDMI 2 INPUT
SOCKET
Power
Up / down
(Volume or channel)
IR SENSOR
Headphone
For 26/32EL93*B | 32/40HL93*B
Using the Remote Control
to select the required choice. Fol-
Using the Side-Key Controls
to adjust volume.
to change programme selection,
to adjust programme selection.
until Source List is dis-
the sound from all speakers.
GREEN LED − On Timer
RED LED − Standby
GREEN LED − Power on
to enter the sub
to scroll through the
Advertisement
Table of Contents
