One Touch Timer Recording - Sanyo C20VT11-M Instruction Manual

Table of Contents

Advertisement

You can start a recording and then programme when the
VCR is to stop recording and go to stand-by mode
automatically.
One touch timer recording is convenient when you want to
go to sleep while recording.
The image and sound are switched off and recording is
continued until the time that you set.
Preparations:
If the clock has not yet been set, set the clock.
(See page 15.)
c1
1
Press two @ REC buttons on the remote control or
the
REC button of the TV set once to start
recording.
RECORDING
ATR
RESET MEMORI
or
Recording Indicator (redi
RECORDING~
V
16:04
SP-O:OO:1O
Recording mode
c1
2
Press the
REC button again and the "OFF --:--"
indication will be displayed on ?he screen.
I
OFF
_____
Clock
16:04
SP-0:00:15
Within 10 seconds, set the recording end time by
using the
REC button.
Each press of the
REC button will advance the
recording end time by units of 30 minutes.
Example
When the clock is set to 16:04, the recording end
time changes as follows;
16:00
16 :04
The
time;
setting
is
+
beginning from an upper
v
time which is most close
OFF
OFF
to the clock setting.
23:30
15:30
16 :04
16 :04
I
I
OFF
OFF
OFF
u. . . .
01:00+00:30+00:00
16 :04
16:04
16 :04
•l To stop the recording at any time, press
the
STOP button.
c1
3 Switch off the power by pressing the Remote
Control's Power ON/OFF ~
button or the TV's
Power ON/OFF ~
button.
The image and sound will be switched off but the
VCR
section
will
continue
recording
until
the
recording end time.
I
Checking and changing of the one touch
timer recording
I
When the
REC buttons are pressed during One Touch
Timer recording, the recording end time will be displayed
on the screen for 10 seconds.
The recording end time can be changed by pressing the
REC
buttonsduring this 10 seconds period.
1
To cancel the one touch timer recording
1
If recording is stopped by pressing the
STOP button,
the one touch timer is cancelled.
To record until the end of the tape, cycle through the
recording end time until the display shows" – -:
– –".

Advertisement

Table of Contents
loading

This manual is also suitable for:

C20vt11-a

Table of Contents