En - User Guide - Barbecook KURO S - I User Manual

EN - USER GUIDE

1 REGISTER YOUR APPLIANCE
Thank you for purchasing a Barbecook appliance! We are sure it
will bring you lots of happy moments.
To optimize your experience, register your appliance at
www.barbecook.com . It takes only a few minutes and yields
some major benefits:
• You get access to our personalized after sales service. This
allows you, for example, to quickly find spare parts for your
appliance or to profit from an optimal warranty service.
• We can inform you about interesting product updates and
direct you to the product information and specifications that
are relevant for your appliance.
For more information about registering your appliance,
refer to www.barbecook.com
Barbecook respects your privacy. Your data will not be
sold, distributed or shared with third parties.
2 IMPORTANT SAFETY
INSTRUCTIONS
2.1 Read and follow the instructions
Read the instructions before using the appliance. Always follow
the instructions carefully. Assembling or using the appliance
differently can cause fires and material damage.
Damages caused by not following the instructions
(improper assembly, misuse, inadequate maintenance...)
are not covered by the warranty.
Remove all securing components including labels, plastic
security elements and protective film ect. prior to assembly
and first use of the fireplace. Assembly must be performed
by two adults in accordance with the instructions in 3.2.
Failure to comply with the warnings, cautions and
recommandations intended to prevent hazards listed
in this instruction may result in fire, explosion severe
bodily injury, ill health, dead or damage to property.
2.2 Use your common sense
Use your common sense when working with the appliance:
• Do not leave the appliance unattended when in use.
• Warning! The appliance will become very hot, do not move it
during operation.
• Use appropriate protection when handling hot parts.
• Keep flammable materials, flammable liquids and dissoluble
objects away from an appliance in use.
• Warning! Keep children and pets away from an appliance in
use.
• Keep a bucket of water or sand at hand when using the
appliance, especially on very hot days and in dry areas.
• Warning! Do not use indoors.
• Note : Use only wood or charcoal in the fireplace. Do not
load more than 3 kilograms of permitted material into the
fireplace. Failure to comply with this recommandation will
cause the combustion chamber (walls of the fireplace) to
burn out sooner and will permanently remove the corrosion
protective coating. In extreme circumstances it may result
in a permanent deformation of the fireplace structure!
Never touch or lean on the fireplace or place objects at the
•
bottom of the structure. Failure to comply with this
instruction may lead to severe bodily injury, death or property
damage.
NOTE : Emty the ashtray only after the fireplace
has cooled down completely and use gloves to avoid burns.
2.3 Select an appropriate location
Use the appliance outdoors only. Using it indoors, even in a
garage or shed, can cause carbon monoxide poisoning.
When selecting an outdoor location, always:
• Make sure the appliance is not under an overhanging
structure (a porch, a shelter...) or under foliage.
• Put the appliance on a firm and stable surface. Never put it
on a moving vehicle (a boat, a trailer...).
3 ASSEMBLING THE APPLIANCE
3.1 Safety instructions
•
Do not modify the appliance when assembling it. It is very
dangerous and not allowed to alter parts of the appliance.
•
Always follow the assembly instructions carefully.
•
The user is responsible for the correct assembly of the
appliance. Damages caused by improper assembly are not
covered by the warranty.
• The combustion chamber is made of steel and may expand
when exposed to high temperatures. Constant temperature
fluctuations may, under certain conditions, lead to micro
cracks or warps in the walls. These are not defects and do
not adversely affect the stability and performance ofb the
structure. All corrosion spots which may appear in the
combustion chamber will become oxidised as long as the
fireplace is used regularly.
NOTE : It is recommended to place the fireplace on a flat and
•
even surface to ensure proper operation. Failure to comply
with this recommendation will cause irregular operation of
the structure during combustion which will result in
excessive heat load being applied to certain sections of the
walls. Irregular operation of the device will accelerate the
burn-up or result in discoloration of the heat-resistant paint
in some places and appearance of the corrosion spots. In
extreme circumstances, it may lead to deformation of the
fireplace structure.
The fireplace has special openings in its base which are
designed to ensure stability and user safety. It is
recommended to perform assembly with help of a
professional.
Never allow the base of the structure to contact with water.
Permanent accumulation of moisture on the fireplace
surface will cause corrosion spots to appear.
The foundation must be even and smooth. In case the
fireplace is intended to be placed on a terrace or a
similar location, the place needs to be first inspected
by a professional to identify whether it can carry the
load.
If the fireplace is placed near a building, at least a 10 cm gap
must be left between the wall of the building and the fireplace
to ensure proper ventilation.
www.barbecook.com 3