Before Use; Operation Manual - Boxxline BDA-1100 Manual

OPERATION MANUAL

FEATURES
This unit is radio-interference suppressed. This appliance meets the requirement of the current European
and national guidelines. Conformity has been established and the relevant statements and documents have
been deposited by the manufacturer.
• A real breakthrough in professional amplifier technology: Boxxline introduces a new range of CLASS-D
AMPLIFIERS with exceptional powerr.
• The extremely high efficiency, reduced power waste and very low heat dissipation are the main
advantages of these PWM-amplifiers!
• Incredible space savings for mobile applications: enclosure only 1U high!
• Incredible low weight: BDA-1100 = 3,3kg, BDA-2200 = 5,5kg, BDA-3600 = 5,6kg!
• Extremely high power output:
ο BDA-1100:
ο BDA-2200:
ο BDA-3600:
• Output in bridge mode:
ο BDA-1100:
ο BDA-2200:
ο BDA-3600:
• All the protections you can think of for professional use:
ο Signal + current limiters
ο Overload protection
ο Short circuit current protection
ο DC protection
ο Thermal protection
ο AC, VHF protection
ο Soft Start
ο ...
• Very powerful bass response, also perfect for subwoofers!
• Switchable 30Hz low cut filter eliminates unwanted, power consuming, subsonic frequencies.
• 3 different working modes: stereo, bridge mode, mono mode (inputs linked).
• Input sensitivity: 26dB / 32dB / 1,4V.
• Balanced in/outputs on XLR.
• 2 Speakon connectors (left & right outputs)
• 1 separate red Speakon connector output for bridge mode.

BEFORE USE

• Before you start using this unit please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
• Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject in warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
• Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual.
• To protect the environment, please try to recycle the packing material as much as possible.
Power Full CLASS-D Power Amplifier
2x 540W RMS @ 4Ohm
2x 1.100W RMS @ 4Ohm
2x 1.800W RMS @ 4Ohm
1x 1.080W RMS @ 8Ohm
1x 2.200W RMS @ 8Ohm
1x 3.600W RMS @ 8Ohm
BDA-SERIES