Summary of Contents for Dalian DS-2BB6E10-AP
- Page 1 CAMERA Installing instruction DS series DS-2BB6E10-AP DS-2BB6E14-APR www.umdbetter.com...
- Page 2 Product Model DS-2BB6E10-AP DS-2BB6E14-APR DS-2BB6E14-APR is dome camera with IR function, DS-2BB6E10-AP is Dome camera 。 Declaration This document may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this document.
-
Page 3: Safety Instructions
DS series IP Camera Safety Instructions During the process of installation and operation, please make sure to conform to all the local electrical codes. Please adopt the appropriate power adapter, see datasheet for details. To reduce the risk of fire or electrical shock, please do not expose the product to rain or moisture. ... - Page 4 DS series IP Camera 1.Requests for installation and maintenance personnel Be qualified to do installation and maintenance of CCTV system, and Know well about basic knowledge of CCTV system & parts and installation skills With good command of basic knowledge of cabling and electrical connection in the low voltage environment and operation skills ...
-
Page 5: Table Of Contents
DS series IP Camera Table of Contents Chapter 1 Introduction ................................5 1.1 Description ................................. 5 1.2 Features ..................................5 1.3 Hardware Overview..............................6 2.Chapter 2 Installation ................................9 2.1 Fix the camera: ................................. 9 2.3 Network connection: ............................. 10 2.4 Power supply connection:............................ -
Page 6: Chapter 1 Introduction
DS series IP Camera 1. Chapter 1 Introduction Description IP Camera is a kind of embedded digital surveillance product which combines the features of both traditional analog camera and net digital video server. Due to the embedded Linux operating system and high-efficient hardware platform, the system operates with high scheduling efficiency. -
Page 7: Hardware Overview
DS series IP Camera Hardware Overview 1.1.1 DS-2BB6E10-AP: Appearance of Fixed Dome IP Camera without IR, see Figure 1-1: Figure 1-1 Appearance (without IR) Interfaces of Fixed Dome IP Camera without IR, see Figure 1-2: Figure 1-2 Interfaces (without IR) - Page 8 DS series IP Camera 1.1.2 DS-2BB6E14-APR: Appearance of Fixed Dome IP Camera with IR, see Figure 1-3: Figure 1-3 Appearance (withIR) Interfaces of Fixed Dome IP Camera with IR, see Figure 1-4: Figure 1-4 Interfaces (with IR) Description for interfaces of Fixed Dome IP Camera with or without IR: UMD Security Syetems Installation Manual...
- Page 9 DS series IP Camera Table 1-1 Description of interfaces: Description CVBS, support analog video signal output RJ45, 10M/100M Ethernet Port Steady orange for no data transmission Steady green for normal network connection Alarm output Alarm input RS485 Power supply Audio input Audio output Power supply indicator Reset...
-
Page 10: Chapter 2 Installation
DS series IP Camera 2. Chapter 2 Installation Before installation, please check whether the product is sound or not and all the items supplied with the product are included. Commonly, the camera can be wall mounted and ceiling mounted. This document is mainly focusing on the installation of ceiling mounted, for wall mounted; please refer to this document as well. -
Page 11: Network Connection
DS series IP Camera Plug in SD card: The rear panel of the Fixed Dome IP Camera includes two SD card slots, plug in the SD card according to direction of below picture to complete installation of SD card, if plug it out is required, press the SD card and it will be ejected automatically. - Page 12 DS series IP Camera Figure 2-3-1 Network connection Figure 2-3-2 Fix the Ethernet cable UMD Security Syetems Installation Manual...
-
Page 13: Power Supply Connection
DS series IP Camera 2.4 Power supply connection: Please adopt the appropriate power adapter, and make sure that the plug is firmly inserted into the power socket. When the product is powered on, the power supply indicators will light up. See Figure 2-4: Figure 2-4 Power Supply connection The date &... -
Page 14: I/O Connection
DS series IP Camera 2.5 I/O connection: Alarm In/Out & RS485 included, see Figure 2-5: Figure 2-5 I/O connection I/O Pin Features I/O Socket Positive (+2V ~ +6V) RS485 Negative (-2V ~ -6V) Alarm Input Positive (Signal Input) Alarm Input Alarm Input Negative (Connected to GND) Alarm Output to A Alarm Output... -
Page 15: Audio Connection
DS series IP Camera 2.6 Audio connection: Connect the product to connectors of Line In & Out, see Figure 2-6: Figure 2-6 Audio connection UMD Security Syetems Installation Manual... -
Page 16: Cvbs Output
DS series IP Camera 2.7 CVBS output: A cable with BNC connector will be supplied with the product, see Figure 2-7: Figure 2-7 CVBS connection 2.8 Installation completes: Cover the transparent casing and tighten the screws to complete installation. This series is also available to be installed with shielded cover for outdoor environment. -
Page 17: Chapter 3 Quick Operation Guide
DS series IP Camera 3. Chapter 3 Quick Operation Guide 3.1 Network connection The related network parameters like IP address, subnet mask and port number of the IP Camera which need to be configured after the hardware installation. But before configuration, please make sure that the IP Camera is connected to the PC and accessible. - Page 18 DS series IP Camera After Active X control is downloaded, double click Web Player.exe and pop up interface below, click Install to complete the installation of Active X: Figure 3-2-1 Figure 3-2-2 Note: Abnormal installation of ActiveX and its solutions: 1.
- Page 19 DS series IP Camera Figure 3-3 Please revise the security level of IE from Tools-> Internet options-> Security-> Custom level, see Figure 3-4, Figure 3-5: Figure 3-4 UMD Security Syetems Installation Manual...
- Page 20 DS series IP Camera Figure 3-5 2. During the process of installation of ActiveX, it may pop up the windows as Figure 3-6, please shut down the IE browser and install it correctly: Figure 3-6 UMD Security Syetems Installation Manual...
- Page 21 DS series IP Camera Reboot the IE browser after installation of ActiveX completes, input the IP address of IP Camera to turn to Page Login, enter Username and Password and click Login into the main interface. See Figure 3-7: Figure 3-7 IE Login ...
-
Page 22: Main Interface Introduction
DS series IP Camera 3.3 Main Interface Introduction In the main interface of IP Camera, users can do live view, snap, record, playback, talk, listen, full screen, PTZ, image adjustment, log search and configuration of related parameters. See Figure 3-9: Figure 3-9 Main Interface 3.4 Modifying the IP address 3.4.1 Run the Device Search Tool which can be extracted from supplied CD or downloaded from our... - Page 23 DS series IP Camera 3.4.2 Select the IP Camera which shall be modified, see Figure 3-11: Figure 3-11 IP Camera Selected 3.4.3 Click “Set” and enter the modified IP address, Subnet Mask, Gateway, Port, Username, Password, click Ok after completion, then it will prompt you that modified successfully and the device will be reboot.
-
Page 24: Appendix 1 Network Interface Of Ip Camera
DS series IP Camera 4. Appendix 1 Network Interface of IP Camera The default network ports of IP camera are: Web port Communication port, audio/video data transmission 5000 port, talkback data transmission port 5000 Audio/video data transmission port Multi-cast port Multicast original port + channel number ONVIF 2000... -
Page 25: Appendix 3 Faqs
DS series IP Camera 6. Appendix 3 FAQs 1、 Forget Password Solution: There is a [RESET] button on the back panel of the IP camera, press it 1-2 seconds, then loosen it 1-2 seconds, and try 3 times. Camera will restore all default parameters (Factory Settings), user name and password is both “admin”... - Page 26 DS series IP Camera Possible reason 2: IP Address has been occupied by other devices Solution: Stop the connection between IP camera and Network, hook up IP camera to PC separately, reset IP address according to the proper operations recommended. Possible reason 3: IP addresses are in different subnets.
-
Page 27: Appendix 4 Technical Parameters
DS series IP Camera 7. Appendix 4 Technical parameters Model DS-2BB6E10-AP DS-2BB6E14-APR Hardware Hi3516C Image Sensor 1/2.8" SONY progressive scan Exmor CMOS 1920(H)×1080(V) Effective Pixels Interface Interfaces ∮14 Iris Fixed Iris Optical lens Focal Motor-drive Lens 2.8~12mm Length 1 CH MIC External access, 3.5mm AV Audio Talkback interface（Optional）... -
Page 28: Product View
DS series IP Camera Data transmission and storage Data storage Video and Image Recording Recording set up to record by Auto or manual (motion and alarm trigger, schedule) Alarm Output FTP,E-mail Network protocol TCP/IP、UDP、RTP、RTSP、RTCP、HTTP、DNS、 DDNS、DHCP、FTP、NTP、PPPOE、SMTP、UPNP Wireless protocols(-W) ------------------------------------------------- ONVIF protocols Support 2.2 version IE 6.0 Above;...