Advertisement
RX-6010RBK/RX-6012RSL
Removing each board connected to the
rear side of the audio board
Prior to performing the following procedure, remove
the top cover and the rear panel.
1.
Cut off the tie band fixing the harness.
2.
Disconnect the DSP board from connector CN481 on
the audio board.
3.
Disconnect the audio input board. DVD board and
the video board from connector CN421, CN431 and
CN441 on the audio board.
4.
Disconnect the tuner board from connector CN411
and CN412 on the audio board.
CN421
CN431
1-4
(See Fig.5 to 8)
Tie band
Tuner
board
CN411
CN412
CN441
Fig.8
Audio
board
Tie band
DSP
board
CN481
CN421
Audio
input
board
DVD
Video
CN441
CN431
board
board
Fig.5
CN481
DSP board
Fig.6
Audio
DVD
input
board
board
CN431
CN421
Fig.7
Tie band
CN411
Tuner
CN412
board
Video
board
CN441
Advertisement
