Record & Capture - Eagle Eye HD-128 User Manual

Record & Capture
① Press Power button to turn on the camera, press REC button to start video record,
when the red icon displayed on the left bottom of screen, that means the camera is
doing normally record.
② Camera could start video record immediately if press the REC button while Wi-Fi
turned OFF, but if Wi-Fi turned ON, camera will only available to start video record
after Wi-Fi boot up completely (Need about 20 seconds), more details please check the
Wi-Fi setting page.
③ Press POWER button to turn on the camera, press POWER button again to switch to
Picture taking mode. Make sure such icon displayed on the left top, then we are
capable to take photo.
Remote to take picture or record video, please check the Remote Controller instruction.
Picture taking function is not available by remote controller.
~ 11 ~