Page 1
MANUAL alfda air purifier ALR230 PLEASE NOTE: Before using remove the foil packing from the filters inside. Thank you for purchasing this product. The product is a unit of air purifier fitted with high efficiency filters. To get familiarized with your new product, please read the manual before the start up carefully and retain this booklet for future reference.
1. Short notes for the use The air purifier alfda ALR230 is equipped with a simple to use timer. Alternatively, it can be controlled with an external conventional time switch. For effective air cleaning, we recommend to proceed as follows: •...
Page 3
5. Komponenten 6. Placement · Min. 10 cm distance to the wall · Do not place nearby curtains · Place the unit where air circulation is good. · Place the unit near the source of the polluted air for more effective results (1) Air inlet (5) Filter Set IMPOTANT: The air cleaner is not suitable to...
Page 4
8. Installation of the filter The filter element include the pre-filter, HIMOP-filter and HEPA-filter 1. Open the front panel by pull it at the lower part. 2. Lift the front panel 3. Turn lock to 90°. 4. Remove filter as shown. 5.
In order to claim the warranty service involves the following steps: Please contact by e-mail (verkauf@alfda.de) the customer service and describe the problem. Please note the invoice number and your name in this e-mail. If a return is agreed upon, send the unit securely packaged at your expense to our service. Include a copy of the invoice on which you note the defect.
Need help?
Do you have a question about the ALR230 and is the answer not in the manual?
Questions and answers