JBL ESC 360 Service Manual

ESC 360
Service Manual

SPECIFICATIONS:

Audio Section
• Surround Formats: Dolby Digital - DTS - Dolby Pro Logic
• Frequency Response at 1W (+0dB, -3dB): 55Hz - 20 kHz
• Signal-to-Noise Ratio (IHF-A): 80 dB
Satellite Section
• Frequency Response (-6db): 120 Hz-20 kHz
• Sensitivity (2.83V @ 1m): 84 dB
• Nominal Impedance: 4 Ohms
• Recommended Amplifier Power: 25 Watts RMS (in sub)
• Titanium Laminate HF: 12 mm
• Paper Cone Midrange : 75 mm
• Dimensions (H x W x D): 111 x 81 x 92 mm
• Weight: 0.5 kg
• Finish: silvergray
Center Section
• Frequency Response (-6db): 120 Hz-20 kHz
• Sensitivity (2.83V @ 1m): 86 dB
• Nominal Impedance: 4 Ohms
• Recommended Amplifier Power: 25 Watts RMS (in sub)
• Titanium Laminate HF: 12 mm
• Paper Cone Midrange : dual 75 mm
• Dimensions (H x W x D): 83 x 194 x 95 mm
• Weight: 0.8 kg
• Finish: silvergray
Subwoofer Section
• Low Frequency Cut-off: 40 Hz
• High Frequency Cut-off: 160 Hz
• Built-in Power Amplifier (RMS): 25 Watts x 5 + 60 Watts
• Paper Cone Long Throw Driver : 165 mm
• Dimensions (H x W x D): 315 x 300 x 310
• Weight: 7.2 kg
• Finish: silvergray
General Section
• Power Requirement: 230V/50-60Hz
• Power Consumption: 80 Watts