Subscribe to Our Youtube Channel
Related Manuals for Elumen8 Kudos 108
Summary of Contents for Elumen8 Kudos 108
- Page 1 Kudos 108 User Guide Professional Entertainment Technology Innovation, Quality, Performance...
- Page 2 6. Fixture Cleaning The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.
- Page 3 1. Safety Instruction Not used. 5. Troubleshooting Please read carefully the instruction, which includes important information Following are a few common problems that may occur during operation. Here are about the installation, usage and maintenance. WARNING some suggestions for easy troubleshooting: Please keep this User Guide for future consultation.
- Page 4 The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly 4.5 DMX512 Connection damaged. Caution There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your nearest dealer.
- Page 5 Photometric diagram: 3. How To Set The Unit 3.1 Control panel Display To show the various menus and the selected functions DMX input present MASTER Master Mode SLAVE Slave Mode SOUND Flashing Sound activation Button MENU To select the programming functions DOWN To go backward in the selected functions To go forward in the selected functions...
- Page 6 Only for remote control Connecting with CA-8/CA-9/CA-9RTX to control the unit for Stand by, Function and Mode function. Mains input Connect to power supply. Mains output Connect to supply power to the next unit. DMX input/output For DMX512 link, use 3/5-pin XLR cable to link the unit together. 3.2 Main Function To select any of the given functions, press the MENU button up to when the required one is showing on the display.
- Page 7 4.3 DMX Controller By using a universal DMX controller to control the units, you will need to set DMX address from 1 to 512 so that the units can receive DMX signal. Press the MENU button up to when the DMX Address is showing on the display. Pressing ENTER button and the display will blink.
- Page 8 DMX Address 4.1 Master/Slave Built In Preprogrammed Function Select DMX Address, press the ENTER button to confirm, the present address will blink on By linking the units in master/slave connection, the first unit will control the other units to give an automatic, sound activated, synchronized light show. This function is good when you the display.
- Page 9 (Notice: Other settings are NOT changed while choosing Defaults Setting!) Sound Sense Press the ENTER and the corresponding functions will set to defaults setting, to go back to the functions without any change press the MENU button again. Hold and press the MENU Select Sound Sense, press the ENTER button to confirm, present mode will blink on the button about one second or wait for one minute to exit the menu mode.
- Page 10 change press the MENU button again. Hold and press the MENU button about one second ENTER button and the display will show the number of working hours of the unit. To go back or wait for one minute to exit the menu mode. to the functions press the MENU button again.
Need help?
Do you have a question about the Kudos 108 and is the answer not in the manual?
Questions and answers