Error Messages & Protections - SC iStick TC40W User Manual

SC iStick TC40W – Error Messages & Protections
1� If you press and hold the power button for more than 10 seconds, the device
automatically switches off due to safety reasons� You will know this has happened
when "Over 10s" appears on the display�
2� If a short circuit has occurred in combination with the atomizer, the device will also
inform you of this by showing "Atomizer Short" on the display, and switching off
automatically� Should this happen, use a different atomizer head or ensure that the
atomizer has been properly inserted into the clearomizer�
3� If no atomizer is present, "No Atomizer" will appear on the display�
4� If the actual temperature of the coil is higher than the target temperature in TC-Ni
Mode, the display shows „Temp Protection"�
39