Nokia 2125i User Manual page 55

Handsfree
Scroll to and select an option, to enter the submenu and modify its settings.
Default profile—Select the profile you wish to automatically activate when your
phone is connected to a car kit. See "Profiles," p. 45.
Automatic answer—Set so calls are answered automatically after one ring when
a car kit is connected. Select On
Lights—Choose to keep the phone lights always on or to shut off automatically
after several seconds. Select On
Loopset
The LPS-4 Loopset (for use with T-coil equipped hearing aids) is recommended for
use with your phone. Scroll to and select the option of your choice, to enter the
submenu and select Use loopset
TTY/TDD
This feature is dependent on your carrier. In addition to the Nokia phone, you will
need the following for TTY/TDD communication:
• A TTY/TDD device that is cellular ready or cellular compatible.
• A cable for connecting the TTY/TDD to your Nokia phone, usually supplied by
the manufacturer of the TTY/TDD device.
Set up the TTY/TDD profile
To connect your phone directly to the TTY/TDD device, set up the TTY/TDD profile.
1. Connect one end of the cable to the TTY/TDD device.
2. Insert the other end of the cable into the headset jack.
3. In the standby mode, select Menu
TDD > Use TTY > Yes.
TTY/TDD calls
Important: Some manufacturers of TTY/TDD devices suggest that the
phone be at least 18 inches from the TTY/TDD device. When connecting
to any other device, read its user guide or contact its manufacturer for
detailed instructions and safety information.
• Check with the manufacturer of the TTY/TDD device for a connecting cable
that is compatible with the Nokia phone.
or Off.
or Automatic.
> Yes or No to modify the settings.
> Settings > Enhancement settings
S e t t i n g s
> TTY/
55