Dodge RAM 1500 1998 Owner's Manual page 65

2 - 30 FRONT - LINK/COIL
FRONT - LINK/COIL (Continued)
DESCRIPTION
Stabilizer Bar
Frame Bolt
Stabilizer Link
Lower Control Arm Nut
Stabilizer Link
Axle Bracket
Stabilizer Link
Stabilizer Bar Nut
Hub/Bearing
Bolts
Axle Nut
Tie Rod End
Nut
NOTE: Suspension components with rubber/urethane bushings should be tightened with the vehicle at nor-
mal ride height. It is important to have the springs supporting the weight of the vehicle when the fasteners
are torqued. If springs are not at their normal ride position, vehicle ride comfort could be affected and pre-
mature bushing wear may occur.
SPECIAL TOOLS
9 1/4 AA
Puller C-3894–A
Remover, Wheel Stud C-4150A
N·m
61
102
71
38
202
179 Beginning Torque,
Then Rotate 5 to 10
Times With a Final Torque
of 356
75
Ft. Lbs.
45
75
52
27
149
132 Beginning Torque,
Then Rotate 5 to 10
Times With a Final Torque
of 263
55
BALL JOINT PRESS - C-4212F
REMOVER / INSTALLER BALLJOINT - 8445
DR
In. Lbs.
—
—
—
—
—
—
—