Infrared Remote Control; Bracket Installation; Close Alarm - Opiz OP-D05 User Manual

Wireless video door phone

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

click to listening test.

7. 3 Click"DEC/ADD"to adjust the volume(4 levels in total).

7. 4 Click "OK" to confirm the tone (income tone).

7. 5 Click" BACK" to back to the menu and enter to standby status.

8. ID-set

8. 1 Click" ID-set" enter to monitor setting menu.

8. 2 Click" UP/DOWN" to choose the ID number (1-3).

8.3 Click "OK" after choose correctly.

Note: One outdoor unit can support 3 pcs indoor monitor ,To distinguish the monitors,

you need to set ID number for each monitor ,at present numbers can be selected

from 1-3.and ID number can not be reinvented between monitors to make sure

there is no disturb between each other .

9. Bright: LCD Brightness

Brightness adjustment will be devised in 5 levels (can be adjusted in menu).

9. 1 Click "Bright" to enter brightness adjust menu.

9. 2 Click" UP/DOWN" to increase/reduce the brightness (5 levels),Click "OK" to

confirm the level and back to setting menu.

9. 3 Click" Back" to exit to menu and enter to standby status.

Att: Click "UP/DOWN" to highest or lowest level will be invalid.

10. Color

10. 1 Click "Color" enter to monitor outdoor unit. Can view outdoor image if

communicate fine.

10. 2 Press "V+" button on the back of the monitor to adjust the brightness (5 levels),

Press "V-" button to adjust the chrome（ levels）.

10.3 Press "Monitor" button to exit or waiting 60s to back to standby status

automatically.

11. Standby

11.1 Click "Standby" to enter to setting of standby time.

11.2 Click "UP/DOWN" to increase/reduce standby time(10s-60s)，click "OK" to

confirm and exit to standby time setting menu.

11.3 Click "BACK" to exit to menu and enter to standby status.

1 2. Volume

8 levels for volume adjustment.(can be adjusted on volume setting only)

12. 1 Click "Volume" to enter to volume setting

12.2 Click"UP/DOWN" to increase /reduce the volume(8 levels) click "OK" to confirm

and back to volume setting

12.3 Click "Back" exit to menu and enter to standby status.

Att: Click "UP/DOWN" to highest or lowest level will be invalid

1 3. Time

13. 1 Click "Time" to enter to time setting.

13. 2 Click "LEFT/RIGHT" to choose the digital of the time and date ,Click "UP/DOWN"

to increase/reduce the digitals ,click "OK" to confirm and back to time setting.

13. 3 Click "Back" exit to menu and enter to standby status.

1 4.Auto-DV

14. 1 Click "Auto-DV" to enter to Auto-DV setting.

-11-

14. 2 Click"UP/DOWN" to set auto/ manual video ,click "OK" to confirm and back ,It

was menu video when produced from factory.

Password:

15 1 Click "Password" to enter to Password setting

15 2 Click "LEFT/RIGHT" to choose the digital of new/old passwords , Click "UP/DOWN"

to increase/reduce the digitals, ,click "OK" to confirm .If key in previous password

right will display "Success" ,back to setting menu. If wrong previous password, will

display "Failed" back to password setting, ply reset.

15 3 Click "Back" exit to menu and enter to standby status.

1 6 Wallpaper

Click "Wallpaper" to restore the standby photo