Acquisitions Bloomsbury SE Installation & User's Instructions

Smoke exempt woodburning stove

Advertisement

Quick Links

GUARANTEE

CONDITIONS OF GUARANTEE
Your ACQUISITIONS stove is guaranteed against defects arising from faulty manufacture
for one year subject to the following express conditions. Failure to comply with these
conditions will invalidate the guarantee.
Your ACQUISITIONS dealer or a suitably qualified engineer must install the
stove. Upon installation the receipt must be kept as proof of purchase.
The guarantee is one year from date of purchase.
The guarantee does not cover parts deemed to be replaceable in the normal usage of
the stove. These parts are: glass panels, rope seals, glass seals, bottom grate, ashpan,
fire bricks, baffle plate.
HOW TO PROCEED WITH A COMPLAINT
If you have cause for dissatisfaction with your stove, you should first contact your
ACQUISITIONS dealer, who will bring your concerns to our attention. We will assess
the nature of the complaint and either send replacement parts for your dealer to fit, or
nominate a regional engineer to inspect the appliance and carry out any remedial work that
may be necessary. If the fault is not actually due to faulty manufacture but some other
cause i.e. misuse, failure to install correctly, or failure to service at regular intervals, a
charge will be made to cover the cost of the visit and any new parts required. In the first
year ACQUISITIONS will only deal with the dealer direct.
SPARE PARTS
Only genuine ACQUISITIONS spare parts are recommended. Parts that may need
occasional replacement are:
Fire bricks
Ashpan
Fire grate
Mitt
Baffle
Acquisitions Fireplaces Ltd. Acquisitions House, 24-26 Holmes Road, London NW5 3AB
Tel: 020 7482 2949
Fax: 020 7267 4361
www.acquisitions.co.uk
Manufactured for Acquisitions by Esse Engineering Ltd
9/11 (PP)
e-mail: sales@acquisitions.co.uk
Bloomsbury SE
SMOKE EXEMPT WOODBURNING STOVE
SMOKE EXEMPT WOODBURNING STOVE
SMOKE EXEMPT WOODBURNING STOVE
SMOKE EXEMPT WOODBURNING STOVE
INSTALLATION & USER INSTRUCTIONS
(TO BE LEFT WITH THE CUSTOMER)
UK & IRELAND
GB
IE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bloomsbury SE and is the answer not in the manual?

Questions and answers

Summary of Contents for Acquisitions Bloomsbury SE

  • Page 1 If you have cause for dissatisfaction with your stove, you should first contact your ACQUISITIONS dealer, who will bring your concerns to our attention. We will assess the nature of the complaint and either send replacement parts for your dealer to fit, or nominate a regional engineer to inspect the appliance and carry out any remedial work that may be necessary.
  • Page 2 Should it be likely that children, aged or infirm people approach the fire, then a fireguard • of the flue gases. The optional rear flue box attachment available from ACQUISITIONS should be fitted. has a detachable base that allows for fallen soot to be removed (See Fig. 1).
  • Page 3 Available from MINIMUM ACQUISITIONS The stove should be lit and allowed to warm the flue thoroughly. The air controls can then be set so that the stove burns on a low setting. Allow the burning rate to become steady.
  • Page 4 - see Fig. 4. A rear flue box DIMENSIONS & CLEARANCES attachment is also available from ACQUISITIONS that allows the stove to be installed further out of any building recess. Fig. 1 shows suitable flue connections.
  • Page 5 across the glass forming an air barrier between the glass and the fire bed helping to Fig. 5 - Stove Controls prevent smoke particles sticking to the glass. If the fire dies down too low, opening the primary air control for a short period will revive it.
  • Page 6 of the stove. Loading the stove little and often will help keep the stove temperature steady. MAINTENANCE When loading wood, make sure that the end grain of the wood in the stove is pointing away from the glass, otherwise the moisture and gases coming from the end grain of the wood CLEANING THE STOVE will dirty the glass.

Table of Contents