Advertisement
Quick Links
• Read, understand and follow all printed material provided with and on this device before use.
• Do not exceed rated capacity of 300 lbs.
• Move over smooth, level, seamless surfaces only!
• Sit down gently! Avoid shock loads caused by jumping or falling onto this product.
• Do not stand on this product.
• Keep out of the reach of children! This product is not suitable for children's use.
• Beware of pinch and crush hazards when folding and unfolding.
• Failure to heed these markings may result in personal injury and/or property damage.
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
MODEL
B2036
U.S. Patent No.: 6,969,077
WARNING
!
To avoid personal injury and property damage:
Operating Instructions
& Parts Manual
36" Z Creeper
1
10939 N. Pomona Ave. Kansas City, MO 64153
sales@blackhawk-automotive.com
CAPACITY
300 lbs.
SFA Companies
Printed in China
B2036-M0 rev 02/11
Advertisement
Summary of Contents for Banner B2036
-
Page 1: Operating Instructions
• Do not stand on this product. • Keep out of the reach of children! This product is not suitable for children’s use. • Beware of pinch and crush hazards when folding and unfolding. • Failure to heed these markings may result in personal injury and/or property damage. SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 sales@blackhawk-automotive.com Read this manual and follow all the Safety Rules and Operating Instructions before using this product. Printed in China B2036-M0 rev 02/11... -
Page 2: Specifications
2. Refer to Fig. 2 for the assembled creeper. Reference Nuts (4) Head Cushion Middle Frame Rear Frame Casters (2) Head Frame Casters (4) Locking Pin Fig. 1 Reference Lock Pin Caster Fig. 2 SPECIFICATIONS Model Weight Capacity Dimensions (L x W x H) Contents B2036 300 lbs 36" x 16-5/8" x 4-5/8" 1 Creeper Body, 6 Casters, 4 Nuts... - Page 3 CAUTION Folding components can present pinch and crush hazards during use of this product. Exercise caution when performing adjustments and always be alert and sober while assembling and using this equipment. How to convert the creeper to creeper seat: 1. Refer to Fig. 2, locate and unlock the lock pin by pulling it out until the locking mechanism has been disengaged. Flip the front section of the creeper (head frame) towards the end until the lock pin can engage the creeper seat locking sleeve (see Fig. 3). 2. Flip the head frame section to the other side until horizontal (see Fig. 3). Reference Locking Sleeve Fig. 3 3. Reverse the steps to convert the creeper seat to creeper. Note: Sit down gently! Avoid shock loads caused by jumping or falling onto seat. Do not stand on seat. Do not exceed rated capacity.
- Page 4 90 DAYS LIMITED WARRANTY For a period of ninety (90) days from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to SFA Companies Warranty Service Department, 10939 N. Pomona Ave., Kansas City, MO 64153. Except where such limitations and exclusions are specifically prohibited by applicable law, (1) THE CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE. (2) SFA COMPANIES SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO NINETY DAYS, OTHERWISE T HE REPAIR, REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED...