Download Print this page

Advertisement

Quick Links

Contact Kurt@bedfan.com
Owners Manual & Installation Instructions

Advertisement

loading
Need help?

Need help?

Do you have a question about the Bedfan and is the answer not in the manual?

Questions and answers

Summary of Contents for Bedfan Bedfan

  • Page 1 Contact Kurt@bedfan.com Owners Manual & Installation Instructions...
  • Page 2: What The Warranty Covers

    You will be responsible for all insurance, freight or other transportation charges to our factory. Your Bedfan should be properly packed to avoid damage in transit since we will not be responsible for any such damage.
  • Page 3 INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. SPECIAL NOTE THE BEDFAN HAS ABOUT 5 TIMES AS MUCH POWER AS YOU WILL PROBABLY NEED. START OFF SLOW AND WORK YOUR WAY UP.
  • Page 4: General Safety Information

    Make certain that the power source conforms to the electrical requirements of the Bedfan. Use the Bedfan only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electrical shock, or injury to persons.
  • Page 5 In Your Bedfan Box You should find the following parts along with this instruction manual. 1. Bedfan main body 2. Power converter and fully adjustable speed dial 3. Breeze Bar with upright arms 4. Tall bed bracket (with Velcro attached) 5.
  • Page 6 That is when Kurt Tompkins real- ized he could help a lot of people—not just hot sleepers. Thank you for buying The Bedfan and we hope that you will enjoy it as much as we do. Please know your purchase was conceptual- ized, designed, developed, and assembled right here in the U.S.A.!
  • Page 7 So now you know, you must have good sheets for the Bedfan to work properly. Often people will call and say that their legs are the only thing get- ting any air.
  • Page 8 You will be at a steady equilibrium that will deliver a deeper more restful sleep. The Bottom line is this. When you start to use the Bedfan, make sure you have quality sheets, and turn your thermostat up. Start slow and work your way up.
  • Page 9 You should always start slow and work your way up. You will most likely be a little cool the first time you use the Bedfan. If that is the case, you will need to make your room warmer. This is where you start to save money on your air conditioning bill.
  • Page 10 (see Picture) This is a must.. am sure that you realize that it is not necessary to place the Bedfan in the middle. It can be anywhere along the foot of the Bed that you wish. If you are the hot sleeper, position the Bedfan along the foot of the bed where it is directly in line with your body.
  • Page 11 (b) is the two foam blocks on each one to two inches above the side of the Bedfan. Push them top of the mattress. between the mattress and box spring. This will draw the sheet tight;...
  • Page 12 Installing the Bedfan on a Tall Bed with a Footboard First we must determine that we are dealing with a “Tall” bed. (we removed the bottom sheet so you may see better) This is accomplished by setting the Bedfan next to the bed, on one side.
  • Page 13 Installing the Bedfan on a Tall Bed with a Footboard Now remove the white tape Raise the Bedfan into backing paper and discard it. position and press against the bracket firmly. You may now remove the With the Bedfan fully bracket from the Bedfan.
  • Page 14 Installing the Bedfan on a Tall Bed with a Footboard Simply slide the bracket in With the bracket in from the side of the bed and place we will now raise the position it in line with the person Bedfan up between the bed that will be using the system.
  • Page 15 Installing the Bedfan on a Tall Bed with a Footboard Remember Keep the Tuck the sheet between the mattress and box spring as top of the Breeze Bar normal. With the two foam at least one inch above blocks you simply push these the top of the mattress.
  • Page 16 Copyright 2006 - 2013 Tompkins Research, Inc. P.O. Box 395 Kendalia Texas 78027...