Bluetooth Headset User Guide XERO XB-04 Bluetooth Handset Contents 1. Introduction Bluetooth wireless technology 2. Get started Overview Chargers and batteries Switch the headset on or off Pair the headset with a compatible phone Disconnect the headset from the phone...
Thank you for purchasing the XERO XB-04. Together with Bluetooth mobile phones and other Bluetooth embedded devices, The Bluetooth headset XB-04 allows you freedom to make and receive calls while on the move or in the office, you can connect the headset to a compatible phone that supports Bluetooth wireless technology.
locations .Check with your local authorities or service provider. 2. Get started Overview The headset contains the following parts as shown in the figure: (1)Answer/end key (2)Led Indicator (red/blue) (3)Microphone (4)Earphone (5)Charger socket (6)Ear Hook Before you can start using the headset, you must charge the battery and pair the headset with a compatible phone.
Charger and batteries Check the model number of any charger before using it with this device. The Bluetooth headset XB-04 is intended for use with the chargers that is included in the package. Charging the headset This device has an internal, rechargeable battery which must be fully charged before used for the first time.
When charging is complete, remove the car charger and remove the charger lead from your headset (Please refer to Fig.3.) Travel charger Plug the travel charger into 110-240V wall socket. And then plug the charge lead into the charging port on the Bluetooth headset for charging.
Bluetooth devices. See the user guide of your phone for instructions. 4. Select the headset XB-04 from the list of found devices. 5. Enter the passcode “0000” to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing.
·Disconnect the headset in the Bluetooth menu of your phone. ·Move the headset more than 10 meters(30 feet) away from the phone. You do not need to delete the pairing with the headset to disconnect Reconnect the paired headset to your phone To connect the headset to your phone, switch on the headset, make the connection in the Bluetooth menu of your phone, or press and hold the answer/end key.
Call handling To make a call Use your phone in the normal way when the headset is connected to your phone. To answer a call Press the answer/end key, or use the phone keys. If the automatic answer function is set on, the phone automatically answers the incoming call after one ring.
Seconds, the XB-04 will be switched off and the call will be transferred to your mobile phone. If you want to transfer the call back to your XB-04 press and hold the Answer/end for 3 seconds till you hear a beep. Release the button and the call is transferred back to your phone 4.
and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with compatible chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime.
Page 11
· Keep all accessories and enhancements out of the reach of small children. · Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely. ·...