Features & Specifications; Temporary And Permanent Hold Feature; Filter Change Reminder - Pro 1 IAQ T705 Installation Manual

Temporary and Permanent Hold Featu
Temporary hold: The thermostat will display
HOLD and RUN SCHED on the bottom of
your screen when you press the
key. If you do nothing, the temperatu re will
remain at this setpoint temporarily for 4
hours. Your program setpoint will then
replace your temporary setpoint.
Permanent hold: If you press HOLD key at
the bottom of your sc reen, you will see HOLD
appear below the setpoint temperatu re in the
display. The thermostat will now permanently
stay at this setpoint and can be adjusted
using the
or
To return to program:
key at the bottom of your sc reen to exit either
temporary or permanent hold.
re
or
keys.
Press the RUN SCHED
FEATURES & SPECIFICATIONS

Filter Change Reminder

If your installing contractor has configu red
the thermostat to remind you when the air
filter needs changed, you will see FILT in the
display when your air filter needs changed.
FILT will be shown in the display after your
system has run long enough to require an air
filter change.
Resetting the filter change reminder: When
FILT reminder is displayed, you should
change your air filter and reset the reminder
by holding down the 3rd button from the
left side of the thermostat for 3 seconds.
Hold down for 3 seconds,
to reset filter reminder.
Mon
10:03
Temperature
74
Menu
LEAVE
Set At
AM
74
O
F