Connecting Power Supply; Using The Security Anchor - GEHA 696N User Manual

Setting up

Connecting power supply

1.
Connect the connector of the power cord
to the AC inlet of the projector.
2. Firmly plug the power cable's plug into
the outlet.The POWER indicator will
begin blinking in green.The projector
work on stand by mode.
WARNING
►Please use extra caution when connecting the power cord, as incorrect or
faulty connections may result in fire and/or electrical shock.
►Only use the power cord that came with the projector. If it is damaged,
contact your dealer soon.
►Only plug the power cord into an outlet rated for use with the power cord's
specified voltage range. The power outlet should be close to the projector
and easily accessible. Remove the power cord for complete separation.
►Never modify the power cord.

Using the Security Anchor

The product was designed security
anchor and PIN LOCK functions
)to help prevent
SEE P31
(
unauthorized removal projector.
WARNING
►Do not use the security anchor to prevent the projector from falling down or
held, since it is not designed for it.
NOTE ►The security anchor is not comprehensive theft prevention measures.
It is intended to be used as supplemental theft prevention measure.
power cable
Security Anchor
POWER indicator
AC inlet
Outlet
10