Advertisement
Quick Links
Advertisement
Summary of Contents for CP TECHNOLOGIES WAB-6120
- Page 1 LevelOne WAB-6120 150Mbps Wireless Outdoor PoE Access Point Quick Installation Guide...
-
Page 2: Hardware Installation
Hardware Installation 1. Grab the cover and pull it back harder to take it out 2. Plug Cat.5/5e/6 cable into the RJ-45 port. 3. Slide the cover back 4. plug the power cord into the DC port of the PoE injector... - Page 3 5. Put what in the Step.3 and Step.4 together by plugging the other side of the Cat.5/5e/6 cable in the Step.3 into the PoE port of the PoE injector in the Step.4. When you finish the Step.5, the complete set will be like the following picture.
- Page 4 Configuration Check Your Network Settings to login web UI Please make sure your PC can get IP address automatically, so the router can communicate with your PC during configuration. Select “Control Panel” > “Network Connections”. Right click the “Local Area Connection” and choose “Properties”. Select the TCP/IP protocol for your network card.
- Page 5 AP Mode 1. Choose Wireless > Basic Settings for the wireless basic settings Click save. Choose Security to change the security settings. Click Save.
- Page 6 Now, you can see SSID “LevelOne” in the list. Congratulations! The AP mode is now successfully configured.
Need help?
Do you have a question about the WAB-6120 and is the answer not in the manual?
Questions and answers