Table of Contents
Advertisement
3.3 Deleting Images
You can delete the last picture or video taken with the camera or format the memory to delete all the
images from the camera at once.
To delete the last picture or video
1. Keep pressing the Mode button until it cycles to the "Delete mode" indicated by:
2. Press the Shutter button to delete the last image or video taken with the camera. The last picture will
be deleted from the camera's memory or SD memory card (if an SD memory card is inserted in the
camera).
3. If you do not want to delete the last picture or video, press the Mode button again which will cancel this
operation.
To format the On-Board Memory
1. Keep pressing the Mode button until it cycles to the "Format mode" indicated by:
2. Press the Shutter button. You will be prompted with a blinking "YES." If you are certain that you want to
format the On-Board memory and delete all the pictures from the camera, press the Shutter button.
3. If you do not want to format and delete all the pictures from the camera, press the Mode button again
which will cancel this operation.
To format the SD memory card
1. Ensure that your SD memory card is fully inserted in the camera.
2. Keep pressing the Mode button until it cycles to the "Format mode" indicated by:
3. Press the Shutter button. You will be prompted with a blinking "YES." If you are certain that you want to
format the SD memory card and delete all the pictures from the SD memory card, p ress the Shutter
button.
4. If you do not want to format and delete all the pictures from the SD memory card, press the Mode
button again which will cancel this operation.
Note: The camera does not allow you to choose specific images to delete. You can only delete
the last image taken or all of the images.
3.4 Low Light Warning
If you take a picture in a low lighting condition, your camera will give you a low light warning by displaying
L-L
to prompt you that the lighting condition may be too dark. Try taking the picture where there is more
light, otherwise your pictures may come out dark or blurry.
3.5 Memory Full Warning
If there is not enough remaining memory to store another picture or video, your camera will give you a
memory full warning by beeping and displaying
video cannot be saved. Download your pictures to the computer first and then erase the camera memory
to take more pictures or videos.
FUL
to prompt that the memory is full and the picture or
12
dEL
F
Advertisement
Table of Contents
