ID View IV-BV7660IR-AHDM Quick Start Manual

Advertisement

Quick Links

Thank you for purchasing our products. Please read the cut-sheet carefully before operating.
Warning
* To prevent fire or shock hazard, please do not immerse the unit into the water
for a long period of time.
* Please make sure the adapter used is consistent with product specifications,
Otherwise, it might cause fire, electric shock or damage.
* Pay attention to polarity of the adapter, it might cause some accidents like fires,
and will burn out the camera.
* Please don't connect multiple cameras with the same adapter at the same time;
overloading of adapter capacity may cause fires.
* Power supply must be firmly fixed so as not to cause fires.
* If the device gets abnormal smell or smoke, please stop it immediately and
contact our customer service center.
* If the camera doesn't work, please do not dismantle it by yourself.
Please contact our local distributor or our maintenance office to trouble shoot,
Otherwise, the warranty is voided.
* Please do not splash water on the product components when cleaning.
Technical Specifications
Item Number:
Signal System:
Sensor CCD:
Resolution:
Lens:
OSD:

Quick Start Guide

Item Number: IV-BV7660IR-AHDM
Safety Precaution
IV-BV77660IR-AHDM
NTSC
1/3" Progressive Sensor
720P
Vari-focal 6-60mm
YES

Advertisement

Table of Contents
loading

Summary of Contents for ID View IV-BV7660IR-AHDM

  • Page 1: Quick Start Guide

    Quick Start Guide Item Number: IV-BV7660IR-AHDM Thank you for purchasing our products. Please read the cut-sheet carefully before operating. Safety Precaution Warning * To prevent fire or shock hazard, please do not immerse the unit into the water for a long period of time.
  • Page 2: Installation

    Minimum Illumination: 0 LUX (IR ON) S/N Ratio: More than 52 dB Distance: 150ft LED: 12 PCS High Density IR LED 1Vp-p 75Ω . AHDM / CVBS switch Video Output: Connector video: Operation Temperature: -4°F to +122°F Supplied Power: 24VAC, 12VDC(+/-10%); Installation 1.
  • Page 3: Troubleshooting

    Figure 1 Figure 2 Figure 3 Note: It’s recommended to close the cover cap immediately in case of reducing the absorption capacity of the desiccant bag inside the camera. Troubleshooting 1. No picture or unstable - Check the connection for video cable and/or power cable. 2.
  • Page 4: Configuration In The Osd Menu

    Name Quantity Remark CCTV Camera User Manual Screw * If the camera doesn’t work, please do not dismantle it by yourself. Please contact our local distributor or our maintenance office to trouble shoot, Otherwise, the warranty is voided. * Please do not splash water on the product components when cleaning. Configuration in the OSD Menu You can use the Joystick on the rear panel of the camera to configure camera settings in the OSD menu.
  • Page 5 Auto Off* Pos/Size Position, Size,↑,↓,→,← Defog Gradation 0-2(0*) Auto Default Off* Level Middle*, High, Low Area Position, Size,↑,↓,→,← Default Select Area1*, Area2, Area3, Area4 Backlight Display Position, Size,↑,↓,→,← Black Mask On*/Off HSBLC Level 0-100(20*) All Day* Model Night AGC Level 0-255(48*) Default ATW*...
  • Page 6 Level 0-15(4*) IR Smart Position, Size,↑,↓,→, Area ← IR PWM 0-100(100*) 2DNR Middle*/Low/Off/High 3DNR Middle*/Low/Off/High Off* Special Cam Title 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ▶ →←↑↓()ˉ-_▊/=&:~,. Freeze Off*/On Mirror Off*, Mirror, V-flip, Rotate D-effect Neg. Image Off*/On Off* Select Area1*,Area2,Area3,Area4 Position, Size,↑, ↓,→,← Display Sensitivit y 0-100(64*) Color Green*, Blue, White, Red...
  • Page 7 Position, Size,↑, Color* ↓,→,← Position, Size,↑, Mosaic ↓,→,← Position, Size,↑, ↓,→,← White*, Black, Red, Blue, CYAN, Color Yellow, Green 1.00*,0.75,0.50, Trans 0.25 Default Language ENG*/CHN1/CHN2/GER/FRA/ITA/SPA/POL/RUS/POR/NED/TUR AGC level 0-255(65*) Defect Live DPC Level 0-100(100*) Position, Size,↑, Pos/Size ↓,→,← Close the iris then Start press White DPC...
  • Page 8 Level 0-10(6*) Start AGC 0-255(50*) Auto* End AGC 0-255(200*) Black Level 0-60(0*) Blue Gain 0-100(50*) Red Gain 0-255(50*) User*,0.45,0.50,0.55,0.60,0.65,0. CRT/LCD Gamma 70,0.75,0.80,0.85,0.90, 0.95,1.00 LCD* Blue Gain 0-100(50*) Red Gain 0-100(50*) Off*/On Video. Out PAL/NTSC Exit Save& END /Reset/Not Saved...

Table of Contents