Subscribe to Our Youtube Channel
Related Manuals for Aztech AEK3630
Summary of Contents for Aztech AEK3630
- Page 1 AEK3630 Temperature Controlled Electric Kettle USER MANUAL PLEASE KEEP THIS USER MANUAL FOR FUTURE USE.
-
Page 3: Table Of Contents
Should damages be found on the appliance, its power cord and/or its other components – do not use the appliance and immediately bring it to the Aztech Service Center for repair or replacement. • Before use, please check if the power voltage of your Electric Kettle correctly corresponds to your home’s power supply. - Page 4 When pouring boiling water, ensure to handle the kettle carefully. • Your Aztech Electric Kettle is not intended for people with reduced physical, sensory or mental capabilities, and/or lack of experience or knowledge. Constant supervision (from a person responsible for their safety) should be provided if such individuals would be using, cleaning, or operating, the appliance.
-
Page 5: Package Contents
PACKAGE CONTENTS • AEK3630 Electric Kettle • User Manual • Gyral Base • Warranty Policy • Easy Start Guide APPLIANCE OVERVIEW ELECTRIC KETTLE COMPONENTS 1. Spout and Filter 7. Control Panel LCD 2. Lid Release Button 8. Temperature 3. Control Panel with LCD Adjustment Buttons 4. -
Page 6: Before Use
BEFORE USE Before first use, fill the kettle with the right amount of water (just below spout), bring to boil then discard boiled water. Do this process TWICE. This will ensure that residues left from the manufacturing process are completely removed before using it for boiling water. - Page 7 STEP 3: Select Function BOIL WATER You can do any of the provided methods below in heating your water: • Option A. Press the ON/OFF (O/I) button, by default this will boil the water up to 100 °C. OPTION A SEQUENCE •...
- Page 8 OPTION B SEQUENCE. • Option B. Press the + (LCD will display 100°C) or - (LCD will display 40°C) button and adjust until the preferred boiling temperature is set. Press the Keep Warm button, then press the ON/OFF button to confirm. NOTE: The Keep Warm function will only work if the water inside the kettle is below 90°C.
-
Page 9: Kettle Care And Cleaning
KETTLE CARE AND CLEANING NOTE: Do not immerse the kettle, its power cord, including its base in water and/or in any kind of liquid substance. CLEANING THE KETTLE Please unplug the power adapter and allow the kettle to cool down. Using a damp cloth, wipe off its external surface to remove dirt and/ or other particles. -
Page 10: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE REASON Limescale buildup. Remove limescales as needed. Please The Electric refer to the Kettle Care and Cleaning section in page 9. Kettle turns OFF There is an inadequate amount of water in the kettle. automatically This activates the dry-boil protection of your device. Add even before more water into the kettle, and wait for two (2) minutes boiling... - Page 12 Copyright © 2016 Aztech Technologies Pte Ltd (CRN:199800635M ). All rights reserved.
Need help?
Do you have a question about the AEK3630 and is the answer not in the manual?
Questions and answers