Advertisement
Quick Links
Installation and technical manual
Electric Combination Heaters TT-KS
TT-KS S
TT-KS N
TT-KS H
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE.
BE SURE TO OBSERVE ALL LABELS AND WARNINGS ON THE APPLIANCE
Edition:07/15
Id_Nr. 911 360 950
.
2
GB
3
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Technotherm TT-KS S
Summary of Contents for Technotherm TT-KS S
- Page 1 Installation and technical manual Electric Combination Heaters TT-KS TT-KS S TT-KS N TT-KS H THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. BE SURE TO OBSERVE ALL LABELS AND WARNINGS ON THE APPLIANCE Edition:07/15 Id_Nr. 911 360 950...
- Page 2 Manual TT-KS 1. Safety Information Electrical Connections: The wires in the mains leads are colored in accordance with the following code: GREEN & YELLOW: EARTH BLUE: NEUTRAL BROWN: LIVE WARNING – THIS APPLIANCE MUST BE EARTHED The installation of this appliance should be carried out by a competent electrician in accordance with I.E.E.
- Page 3 TBF or TPF. All TECHNOTHERM radiators are manufactured to the highest safety and quality Standards. Each radiator is CE Marked and carries all the necessary European Approvals. Each radiator is fully checked and tested prior to leaving the factory and as such is packed...
- Page 4 Manual TT-KS We hope you enjoy the comfort provided by this superior product and we look forward to being of assistance to you in the future. 3.0 Preparation Before beginning, remove the radiator and parts from the box and check everything is present and correct.
- Page 5 Manual TT-KS Rad. Length Bracket separation [cm] [cm] Note: The height of the bracket to the floor is the same height as the bottom of the radiator to the floor.
- Page 6 Manual TT-KS Wall fixture and fittings Drill, plug, and secure the brackets to the wall. Appropriate fixtures must be used depending on the wall material: Solid brick/High density block walls These must be drilled and plugged with the Raw plug No. 10 size fiber inserts provided. The correct size of drill (5.5mm) should be used and the hole should be drilled to a depth of 8 mm greater than the length of the Raw plug so that the fixing is made below the plaster layer.
- Page 7 Note: “It is not allowed to mount the heater in front of a socket-outlet” Electrical connection All TECHNOTHERM TT-KS radiators come with a standard UK 3 pin plug that can be directly connected to an electrical socket. Alternatively the mains cable can be cut to length...
- Page 8 Manual TT-KS 3.3 Radio frequency – wired versions model E4 The regulation of the desired room temperature implements a built-in temperature control device. position 0 : OFF position 1 : approx. 5°C (frost protection) position 4 : approx. 20°C position 6 : approx 30°C An illuminated display indicates the heating process of the radiator.
- Page 9 Manual TT-KS CAUTION – After completion of works all electrical connections should be tested for tightness. Additionally an electrical safety check should be carried out ie: short circuit, earth continuity, resistance to earth and polarity check and all the relevant test certificates produced.
- Page 10 Manual TT-KS No attempt should be made to move the radiator without first seeking specialist advice. If you are not happy that the radiator has been securely fixed, please inform your installer. UNDER NO CIRCUMSTANCES SHOULD YOU ATTEMPT TO MOVE THE RADIATOR OR LOOSEN WALL FIXINGS WITHOUT TAKING THE NECESSARY ADVICE.
- Page 11 (such as soot or incense generated from the burning of candles etc.). TECHNOTHERM Service: Fon: +49 (0)911-93 78 32 10 Lucht LHZ Elektroheizung GmbH & Co. KG Obere Hauptstr.
Need help?
Do you have a question about the TT-KS S and is the answer not in the manual?
Questions and answers