Table of Contents
Advertisement
Connections
The VisionSDI2 card has four BNC type connectors for two separate, simultaneous inputs and two Loop
Through outputs. The connectors are identified by coloured LED's; green for input and blue for Loop
Through outputs:
Supported Formats
The VisionSDI2 card supports the following formats:
•
SD-SDI (480i/576i)
•
HD-SDI (up to 1080i)
•
3G-SDI (upto 1080p)
Cable Length
The VisionSDI2 supports cable lengths of up to 150m for 3G-SDI and 300m for SD-SDI. These figures are
based on using low loss co-ax cables (Belden 1694A).
6
Advertisement
Table of Contents
