How To Disassemble - Judge JEA60 Instruction Manual

How to disassemble

Ensure that the machine is disconnected from the electricity supply before
disassembly.
Disassembly is the reverse of the procedure described under "How to
assemble".
How to use
1.
Assemble the Food Processor (see "How to assemble") and site on a clean,
dry, flat surface.
2.
Prepare the food by chopping into small pieces, approximately 20mm x 20mm
x 20mm, so that they fit into the Feed Head
3.
Insert the Mains Plug
4.
Position a bowl or other suitable container beneath the outlet of the
Feed Head , to catch the processed food.
2
5.
Place food to be processed in the inlet of the Feed Head
6.
Using only the Food Pusher
the Pulse Button
•
Do not run the Food Processor for more than 2 minutes continuously. Wait a
further 1 minute before running again.
•
DO NOT USE UNDUE FORCE, ANY OTHER IMPLEMENT OR YOUR FINGERS.
7.
Switch off at, and disconnect from, the mains supply.
8.
With a plastic or wooden implement, remove any food left in the Feed Head
2 and the Insert
9.
Disassemble (see "How to disassemble") and clean (see "Cleaning").
into a mains socket and switch on at the socket.
8
to push the food into the Feed Head
3
to process the food.
7
4 into your container.
inlet.
2
Food Processor
.
2
, press
2