Summary of Contents for Foes Shaver 29
- Page 2 WHAT FOES WILL DO UNDER THE WARRANTY riding with heavy loads, commercial activities, and other types of non- Foes will repair or replace any part that is determined by Foes to be covered standard use can dramatically shorten the useful life of the Foes Frame or by this warranty.
-
Page 5: Factory Settings
Left Dropout Right Dropout Rockshox Rear MAXLE Lite For the break-in period Foes recommends that you introduce a low pressure, (142mmOLD x12mm Thru Axle) like 65 psi, to start. This is a good setting to break-in your shock, and will... -
Page 6: Air Pressure
Shaver/F275/SV29-FOX Float CTD adjust 1. AIR PRESSURE 4. COMPRESSION DAMPING the main air spring controls the sag of the shock. the compression dampening has three levels For the SV to ride properly it is important to of adjustment and is controlled by the blue setup the shock with the correct amount of sag. - Page 7 Check tires for wear Check spoke tension and retention, if necessary E-mail: Check chain for worn, damaged, or loose links, replace chain if necessary Complete tune-up performed by an authorized FOES dealer Serial#: Bike model: TORQUE We have attached a brief list of torque specifications for bolts and...