Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to EVD-L04/100A1-960, EVD-L08/200A1-960, EVD-L16/400A1-960 DVR Pre-Installation The DVR is highly advanced surveillance equipment that should be installed with care. Please take into consideration the following precautionary steps before installation of the DVR.
Quick Operation Guide of EVD-Lxx-xxxA1-960 seriesDVR 4. Re-install the cover of the DVR and fasten screws. Front Panel EVD-04/100A1-960, EVD-L08/200A1-960, EVD-L16/400A1-960 Table 1 Description of Indicators Icon Description Indicator turns red when DVR is powered up. Indicator lights in red when data is being read from or written to HDD. Indicator blinks blue when network connection is functioning properly.
The rear panel of EVD-L08/200A1-960 is shown below: The EVD-Lxx/xxxA1-960 series DVR provides no HDMI interface. The EVD-L04/100A1-960 provides 4 video input interfaces and the EVD-L16/400A1-960 provides 16 video input interfaces on the rear panel. Table 2 Description of Rear Panel...
Quick Operation Guide of EVD-Lxx-xxxA1-960 seriesDVR HDD Storage Calculation Chart The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate. Bit Rate Storage Used 96Kbps 128Kbps 160Kbps 192Kbps 224Kbps...
Quick Operation Guide of EVD-Lxx-xxxA1-960 seriesDVR Menu Operation Menu Structure The menu structure is shown as below: The EVD-Lxx/xxxA1-960 series DVR provides no PTZ feature. Startup and Shutdown Proper startup and shutdown procedures are crucial to expanding the life of the DVR. Before you start: Check that the voltage of the extra power supply is the same with the device’s requirement, and the ground connection is working properly.
Quick Operation Guide of EVD-Lxx-xxxA1-960 seriesDVR 3. Click the Shutdown button. 4. Click the Yes button. 5. Disconnect the power supply of the device. Using the Setup Wizard The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard starts once the device has loaded.
Quick Operation Guide of EVD-Lxx-xxxA1-960 seriesDVR Table 4 Mouse Operation in Live View Name Description Menu Enter the main menu of the system by right-clicking the mouse. Single Screen Switch to the single full screen by choosing channel number from the dropdown list. Multi-screen Adjust the screen layout by choosing from the dropdown list.
Quick Operation Guide of EVD-Lxx-xxxA1-960 seriesDVR cancel the operation. Select the Menu Output Mode to Main CVBS from the right-click menu on the CVBS output screen. On the pop-up message box, click Yes to restart the device to enable the CVBS output as the main output. You can select the Menu Output Mode under Menu >...
Quick Operation Guide of EVD-Lxx-xxxA1-960 seriesDVR All-day playback by channel 1. Enter the All-day Playback menu. Right-click a channel in live view mode and select All-day Playback from the menu. Under multi-screen live view, record files of the selected channel will be played back. 2.
Page 12
Quick Operation Guide of EVD-Lxx-xxxA1-960 seriesDVR Backup Recorded files can be backed up to various devices, such as USB flash drives, USB HDDs or a DVD writer. To export recorded files: 1. Click Menu>Export to enter Video Export interface. Choose the channel (s) you want to back up and click the Quick Export button. 2.
Page 13
Quick Operation Guide of EVD-Lxx-xxxA1-960 seriesDVR...
Need help?
Do you have a question about the EVD-L04/100A1-960 and is the answer not in the manual?
Questions and answers