Robotouch Elite Massage Chair Manual page 6

Method Of Usage
6.Handle
controller frame installation
Handle controller traY
Screw
Frame
Handle controller
frame assemblY
.
Ready for the handle controller tray,
steel pole,
take out the fixed screws
on the
handle controller tray. (Figure
1)
.
in""rt tfr"
ball
joint oi thelteel pole
to
the concave spherical of
the handle controller
tray.(figure 2)
l,_)
nD@/
( Figure
l)
.
screw the screws in to
the hole which
got in step
1
and tighten it, take care the
direction, should be screw it
from right
to left. (Figure 3)
.
Prepare
ihe handle controller
frame
assembly in step
3'(figure 4)
( Figure 2)
(
Figure 3)
( Figure 4)
Method Of Usage
.
lnsert the handle controller frame assembly in
to the cylindrical fixed pipe,
be carefully
that the two groups hole
out
side and inside should be one to one correspond.(figureS)
.
Prepare two screws which tighten on two sides
(figure 6)
( Figure 5)
Screw the two
screws
on
(
Figure
6)
two sides make it tighten, finish the installation( figure 7)
T.Controller installation and usage
lnsert the handle controller in to the
frame (figure
1),
the frame can turn left and rig ht
freely. (Figure 2) and
the
handle controller can swing freely in horizontal direction.
( Figure
7)