1. Manuals
  2. Brands
  3. Gilras Manuals
  4. Microscope
  5. GR-54
  6. User manual

Gilras GR-54 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

USER MANUAL

TYPE：GR-54

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GR-54 and is the answer not in the manual?

Questions and answers

Summary of Contents for Gilras GR-54

  • Page 1: User Manual

    USER MANUAL TYPE：GR-54...
  • Page 2 Lamp: 6V/20W Halogen Lamp Base Longitudinal movement: 90mm Lateral movement: 100mm Fine Base movement: 15mm Vertical movement: 30mm Chin-Rest Vertical movement 80mm Fixation Target Red LED Power: Input voltage: 220V/110V～10％ Input frequency: 50Hz/60Hz Power Consumption: 30VA（max） Output voltage: Gilras LLC...
  • Page 3 740mm  450mm x 500mm Dimension Gross weight: 25Kg Net weight: 24Kg Working environment Temperature: +5℃～+40℃ ≤80% Relative humidity: Air pressure: 800hpa～1060hpa Storing environment Temperature: -40℃～+55℃ ≤93% Relative humidity: Air pressure: 700hpa～1060hpa Transporting environment Temperature: -40℃～+55℃ ≤93% Relative humidity: Air pressure: 700hpa～1060hpa Gilras LLC...
  • Page 4 8. To prevent the instrument from falling down to floor, it should be placed on the floor where the inclination angle is less than 10° 9. Read carefully the safety and other signals on this machine in order to use the product safely. Gilras LLC...
  • Page 5 Fuse 110V:2A 125V Rated value and current value 220V:1A 250V At the front of power supply box, use with on and Power Change input voltage to adjust the equipment to Voltage selector work under appropriate voltage THE MARKS OF LIGHT Gilras LLC...

  • Page 6: Table Of Contents

    Adjusting the inclination of the illumination part ________________________ 18 Replacing the illumination bulb ______________________________________ 18 4.6 Replacing the fuse ______________________________________________________ 19 4.7 Replacing the chin-rest paper ____________________________________________ 20 4.8 Consumables __________________________________________________________ 20 5. Trouble shooting guide _________________________________________ 21 Appendix A ____________________________________________________ 22 Appendix B ____________________________________________________ 22 Gilras LLC...

  • Page 7: Nomenclature

    Version:1.0 GR SLIT LAMP USER MANUAL 1 Nomenclature Gilras LLC...
  • Page 8 Rotate this knob to adjust the spot and the slit height. Swing the knob horizontally to revolve the slit. 17. Filter Selection Lever and display mark The lever can choose different filters. 18. Forehead Belt To fix the patient’s head on an appropriate position Gilras LLC...
  • Page 9 Four inclination stops are available from 5°up to 20°. The interval between each is 5°. 27. Chin-rest Elevation Adjustment Knob Rotate the knob to adjust the elevation of the chin-rest 28. Rail Cover Protect the rail surface 29. Main Power Switch Gilras LLC...

  • Page 10: Assembly

    MICROSCOPE PART Fig.2.1.2 ILLUMINATION PART Fig.2.1.3 WORK TABLE PART Fig.2.1.4 RAIL COVER Fig.2.1.5 BREATH SHIELD Fig.2.1.6 INPUT POWER CABLE FOCUSING TEST ROD Fig.2.1.7 PROTECTING CAP CHIN-REST PAPER SCREW DRIVER Fig.2.1.8 SPARE BULB USER MANUAL PACKING LIST Fig.2.1.1 Fig.2.1.2 Gilras LLC...

  • Page 11: Assembly Procedure

    3．Open the fuse holder with screw driver and take out the fuse, check and ensure that its rated value is corresponding to the mains voltage: A Tea Fig 2.2.1 110V---------------------2A Fig.2.2.1 5．Lift the worktable to aim its screw hole at 220V---------------------1A Gilras LLC...
  • Page 12 B team（Fig.2.2.1 B team）, retighten the previously removed screw make head-rest connect with work the binocular table .(Fig. 2.2.4) tubes Four screws Fig.2.1.2 Limit groove Screw Fig.2.2.7 Limit pin Fig.2.2.4 Body 9．Take out the slit lamp part (Fig.2.1.3)， put Insert Gilras LLC...

  • Page 13: Checking Procedure After Assembling

    18.Put on focus test rod (Fig.2.1.7)， Adjust the slit width control knob and there Fig.2.3.4 should be facula on the black flat surface 21. Turn on the light knob (Fig.3.1.3)， the Gilras LLC...

  • Page 14: Operation Procedures

    Turn the slit width control time a stereo vision will be obtained. knob (Fig.2.3.1) to make the slit width to When adjusting, be sure that the be 2~3mm. eyepieces same level (Fig.3.1.5). Dark Bright prism Brightness control switch Fig.3.1.3 Fig.3.1.5 Gilras LLC...

  • Page 15: Patient Position And Use Of Fixation Target

    Keep the joystick erect and move the base indicated approximately by the scale on to make the microscope move on the the knob. (Fig.3.4.1) horizontal surface to aim at the object appropriately (Fig.3.3.1) Vertical adjustment Rotate joystick adjust Show slit Gilras LLC width Fig 3.4.1...
  • Page 16 Fasten the centering comfortable. After using the other filters, knob and the slit light will return to the we should turn back to the thermal safety. center of the microscope vision field Gilras LLC...

  • Page 17: Operation Notes

    SLM diagnosis. So if the light is shaft too dark, it will affect the observing effect. Conversely, if the light is too bright, in a long Slide plate time exposure patients’ vision might be affected. If patients feel uncomfortable, Gilras LLC...

  • Page 18: Protecting

    When it is appropriate, fasten the screw of the right knob Take lamp part firmly again (Fig.4.3.1). Right knob Fig.4.3.1 Loosen the Left knob quick disposal screws Fig.4.5.2 Gilras LLC...

  • Page 19: Replacing The Fuse

    3. The fuse specification： 110V 2A， 125V 220V 1A， 250V Attention: Please select the fuse of the same type, specification and rate value. Gilras LLC...

  • Page 20: Replacing The Chin-Rest Paper

    When the paper is depleted, pull upward two fixing pins of the chin-rest and place a new package of paper, then fix the fixing pins again. (Fig.4.7.1). Pull up pin Power plug Fig.4.7.1 4.8 Consumables Fuse: 1A/220V ……………………. 1 piece Bulb: 6V20W ……………………….1 piece Gilras LLC...

  • Page 21: Trouble Shooting Guide

    Replace it with a suitable fuse Slit width closes The slit width control knob is too loose Adjust the tightness of the automatically control knob Fixation bulb is off The output plug is loose Insert the output plug firmly Gilras LLC...

  • Page 22: Appendix A

    Halogen bulb Fixation target Transformer Brightness control knob Appendix B Illustration of the board of power box: Fuse box Power socket 110V/220V voltage selector Brightness control knob socket Illumination lamp socket Assembly of power supply: Fig.1 Fig.2 Fig.3 Fig.4 Gilras LLC...
  • Page 23 4. Insert the main power cable and turn on the switch. Referring to the instruction of brightness control knob, the brightness of the bulb will be adjustable. Subject to change in design or specifications without advance notice version： 1.0 Gilras LLC 9990 NW 14 St.#105, Miami FL33172 USA Gilras LLC...

Table of Contents