Honda PS3000HD Instruction Manual page 14

Operating the Power Washer
Pressure Adjustments
The pressure setting is preset at the factory to
achieve optimum pressure and cleaning. If you need
to lower the pressure, it can be accomplished by
these methods.
1. Back away from the surface to be cleaned. The
further away you are, the less the pressure will be
on the surface to be cleaned.
2. Use the Dial-N-Wash to increase and decrease
the pressure. Refer to the Dial-N-Wash Adjust-
ment paragraph.
NOTE: DO NOT attempt to increase pump pressure.
A higher pressure setting than the factory set
pressure may damage pump.
Dial-N-Wash Adjustment
How To Use Spray Wand.
2. The Dial-N-Wash is shipped in the MAX pressure
setting, the MAX pressure bar is aligned with the
arrow (R) on the collar as shown on the left in
above diagram.
Rotating the Dial-N-Wash (M) counterclockwise
until it stops places it in the MIN pressure setting
the arrow (R) will align with the MIN pressure bar
as shown on the right in above diagram.
Adjust the pressure by rotating the Dial-N-Wash (M)
clockwise for higher pressure or counterclockwise for
lower pressure, aligning the arrow with the desired
pressure bar on the Dial-N-Wash.
How to use the Spray Wand
The nozzles for the spray wand are stored in the
nozzle holder on the panel assembly. Colors on the
panel identify nozzle spray pattern.
Refer to the following chart to choose the correct
nozzle for the job to be performed.
Red - 0
Yellow - 15
Green - 25
White -
Black
NOTE: The high pressure spray from your pressure
washer is capable of causing damage to surfaces
such as wood, glass, automobile paint, auto striping
and shrubs. Before spraying, check the item to be
cleaned to assure yourself that it is strong enough to
resist damage from the force of the spray.
www.powershot.co.nz
NOTE: To apply chemicals the black low
pressure nozzle must be installed and
the Dial-N-Wash must be in the MAX
pressure setting.
USES:
o
Powerful pinpoint
for spot cleaning
of hard, unpainted
surfaces or for
high reach areas.
o
Intense cleaning
of unpainted
hard surfaces.
o
Standard cleaning
nozzle for most
applications.
Cleaning of
painted or
delicate surfaces.
-
Low
Pressure
Applies cleaning
solutions.
SURFACES:
Unpainted metal
or concrete.
DO NOT use on
wood.
Grills, driveways,
concrete or
brick walkways,
un-painted brick or
stucco
Yard tools, sidewalks,
unpainted siding, lawn
furniture, stucco,
concrete, gutters and
eaves, brick surfaces.
Auto / RV, marine,
wood, painted brick
and stucco, vinyl,
painted siding.
Low pressure spray is
safe on all surfaces.
Always verify compat-
ibility of cleaning
solution prior to use.