Sunex Tools 90025 Operating Instructions Manual

90025_OpMan 4/18/03 1:57 PM
Operating Instructions • Warning Information • Parts Breakdown
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.

SPECIFICATIONS

Fluid Orifice .......................................................... 1.7mm
Air Inlet: ..................................................................1/4 NPT
Rec. Max. Inlet Pressure: ..............................................43 PSI
CFM: ................................................................ 13 at 43 PSI
Nozzle Pressure .......................................................... 10 PSI
Page 1
Gravity Feed
1
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
90025
1.7mm
HVLP Spray
Gun & Cup
w/ Regulator
Rev. 04/10/03