ABK PA21III Owner's Manual page 8

Table of Contents

Advertisement

list
REC0003
REC0002
REC0001
After selecting the REC0004 program and pressing down the digital wheel, the interface as shown in figure
(16) will be popped up. On such interface, it is possible to listen to or delete the program. Press down the
"DELETE" button to delete the recorded programs in turn, and press down the "AUDITION" button to
enter the trial listening interface as shown in figure (17):
After the trial listening, it will stop automatically and return to the interface as shown in figure (16); it is also
possible to press down the "STOP" button by hand to stop the trial listening. Select and press down the
"RETURN" button to return to the browse interface; select and press down the "EXIT" button to return to
the audio recording interface.
Caution:
1)
The serial number of the latest recording program is 1 (recording 1), and the serial number of the
previous program will be added by 1 automatically.
2)
The signal coming from the audio recording input port (line or microphone) can come out from the
audio output port under the state of audio recording.
3)
After deleting the selected recording program, the serial number of the recording program greater than
that of this program will be subtracted by 1 automatically.
(3) Play editing
On the interface as shown in figure (5), turn the digital wheel and select the "LIST EDIT" option, and press
down the digital wheel once to enter the interface as shown in figure (18). On such interface, it is possible to
add the programs to the playing list of this equipment or delete the programs unwanted in the playing list. It
is allowed to add programs from the built-in song folder of this equipment or from the USB disk connected
to the equipment.
This equipment can play the song in the USB disk directly. As shown in figure (19), open the folders with the
postfix <U> in the right box, and add the programs in the folder to the left playing list to play. Attention: When
playing the programs in the USB disk, it is required to guarantee that the USB disk has been connected to the
length
00:01:22
00:08:11
00:00:06
fig(15)
list
DELETE
REC0003
EXIT
00:00:00 / 01:00:03
REC0002
REC0001
list
DELETE
REC0003
REC0002
EXIT
REC0001
length
AUDITION
00:01:22
RETURN
00:08:11
STOP
00:00:06
fig(17)
8
length
AUDITION
00:01:22
00:08:11
RETURN
00:00:06
fig(16)

Advertisement

Table of Contents
loading

Table of Contents