Safety Precautions Important Safeguards Do not attempt to service this equipment yourself. Refer all servicing to qualified service personnel. 1. Read Instructions 14. Damage requiring Service All the safety and operating instructions should be read before the Unplug this equipment from the wall outlet and refer servicing to qualified appliance is operated.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
Accessories Upon unpackaging the product, check the contents inside to ensure that all the following accessories are included. Item Network Video Recorder Power Cable Quick Guide Rack-mount Kit Operation Manual and Remote Program CD Optical USB Mouse IR Remote Control Multi audio cable Assembly Screws for Adding Hard Disk Drives SATA2 Cables...
Page 5
Alarm Connection Ports HDMI Out Port VGA Out Port Audio Out Port Power In Port For more details on rear panel connections, refer to the operation manual. Connections on the Rear Panel Analog Camera Microphone Network Camera Network Remote Monitoring Keyboard eSATA Storage Device...
Remote Control ID Button Display Button Sequence Buttons Freeze Button Alarm Button Camera Buttons Focus near/far Button Preset set/view Button Zoom in/out Button Menu Button PTZ Button Arrow Button Enter Button Zoom Button Panic Buttons Playback Buttons For more details on remote control buttons, refer to the operation manual.
Getting Started ● Finish the Quick Setup Wizard Setup Wizard • Setup Wizard only appears during initial booting. Network Setup Wizard When you login as an administrator account after initial booting, you can use Wizard to go to Live menu and select Wizard.
Camera Registration Even if the network device uses a protocol supported by the NVR, the device itself may not Once Network Setup Wizard is complete, 16-channel analog be visible for scanning and registration by the cameras are automatically registered and click the “Scan” NVR.
Login • There is no default password for the admin account. Select admin and then OK without entering a password to log in. Configuring the NVR’s settings and accessing its searching and other functions require an authorized user login. • Leaving the admin account unassigned with a password poses a security risk.
Page 10
WebGuard Setup WebGuard WebGuard is a program that allows you to view and search video from remote locations over the Internet and can be accessed on a regular web browser such as Internet Launch Internet Explorer and then enter the following Explorer.
iRAS Program System Requirements NET Framework and Visual C++ Runtime Libraries will be installed automatically, and it may take a few minutes. If NET Framework Recommended Minimum and Visual C++ Runtime Libraries are already ® ® Microsoft Windows 7 x86 installed on the system, this step will be (64bit) (Home Premium, skipped automatically.
Device Registration Click Device Group on the Sites panel and click the bottom. Add Device Group window will appear. To use the functions provided by iRAS, you must first register a device and add the device to a device group. Select System >...
Recorded Video Playback In the panel tabs, click on the Play tab. In the Site list, select a site you wish to connect to. Then, drag & drop the selected site on the playback screen using your In the Site List, make sure that the device has been mouse.
Specifications These product specifications may change without prior notice. General Connector Exterior Dimensions Video In Ethernet: 1 port, Composite: 16 BNC 430mm x 88mm x 415mm (W x H x D) Camera Power Out Composite: 16 BNC Weight (Main Unit) 6.4kg (with 1HDD) HDMI: 1 HDMI Monitor Out...
Need help?
Do you have a question about the DR-6232H and is the answer not in the manual?
Questions and answers