Exerpreutic 1301.6-083116 Owner's Manual

Air elliptical

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Air Elliptical

IMPORTANT: Read all instructions carefully before using this product.

Retain this owner's manual for future reference.

The specifications of this product may vary from this photo, subject to change

without notice.

OWNER'S MANUAL

1301.6-083116

Table of Contents

Need help?

Do you have a question about the 1301.6-083116 and is the answer not in the manual?

Questions and answers

Summary of Contents for Exerpreutic 1301.6-083116

Page 1 Air Elliptical IMPORTANT: Read all instructions carefully before using this product. Retain this owner’s manual for future reference. The specifications of this product may vary from this photo, subject to change without notice. OWNER’S MANUAL 1301.6-083116...
Page 3: Table Of Contents
TABLE OF CONTENTS SERVICE ------------------------------------------------------------------------ 2 LABEL PLACEMENT --------------------------------------------------------- 3 IMPORTANT SAFETY INSTRUCTIONS -------------------------------- 4 OVERVIEW DRAWING ------------------------------------------------------ 5 PARTS LIST -------------------------------------------------------------------- 6 ASSEMBLY GROUP ---------------------------------------------------------- 8 GROUP LIST -------------------------------------------------------------------- 9 HARDWARE & TOOLS PACK --------------------------------------------- 10 ASSEMBLY --------------------------------------------------------------------- 11 COMPUTER -------------------------------------------------------------------- 20 TENSION ADJUSTMENTS ------------------------------------------------- 21 LEVELER ADJUSTMENTS -------------------------------------------------- 22...
Page 4: Service
SERVICE IMPORTANT: FOR NORTH AMERICA ONLY For damaged or defective product, questions, replacement parts or any other service support, please contact our customer service department (8:00 AM - 5:00 PM Pacific Standard Time, Daily) by the below methods: For Best Service, please Email: Service@paradigmhw.com Response Time: 1-2 Business Days Website:...
Page 5: Label Placement
LABEL PLACEMENT...
Page 6: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Basic precautions should always be followed when using this equipment. Read all instructions before using this equipment which include the following safety instructions: Read all the instructions in this manual and do warm up exercises before using this equipment. Before exercising, and in order to avoid injuring your muscles, it is recommended that you perform warm-up exercises for every muscle group.
Page 7: Overview Drawing
OVERVIEW DRAWING...
Page 8: Parts List
PARTS LIST Description Qty No. Description Mainframe 823x210x630 1 027 Left Handrail Arm Ø25x2x950 Rear Stabilizer Ø50x1.5x540 1 028 Spacer Ø16xØ10x20 Handrail Arm Foam Grip Front Stabilizer End Cap Ø50 2 029 Ø24xØ34x300 Bolt M10x57 4 030 Handrail Arm End Cap Ø25 Cap Nut M10 4 031 Sensor with Wire L=900...
Page 9 PARTS LIST Description Qty No. Description Washer Ø40xØ24x3 1 068 Nut M8 Notched Bearing Nut 1 069 Sensor Bracket Bearing 2 070 Small Magnet Bearing Cup 2 071 Wire Plug Ø12.1 Foot Pedal Support Bracket Slotted Bearing Nut 1 072 250x38x3 Washer Ø34.5xØ23x2.5 1 073...
Page 10: Assembly Group
ASSEMBLY GROUP...
Page 11: Group List
GROUP LIST Assembly Description Q’TY Group Front Stabilizer Ø50x1.5x540 Front Stabilizer End Cap Ø50 Bolt M6x45 Transport Wheel Ø23xØ6x32 Nylon Nut M6 Rear Stabilizer Ø50x1.5x540 Rear Stabilizer End Cap Ø50 Right Handrail Arm Ø25x2x950 Handrail Arm Foam Grip Ø24xØ34x300 Handrail Arm End Cap Ø25 Round Plug Ø25x1.5 Left Handrail Arm Ø25x2x950 Handrail Arm Foam Grip...
Page 12: Hardware & Tools Pack
HARDWARE & TOOLS PACK...
Page 13: Assembly
ASSEMBLY Tool: Open-Ended Flat Wrench 1. Front and Rear Stabilizers Installation: Step A: Align the Front Stabilizer (7) onto the front curve of the Mainframe (1), With the Transport Wheels (8) facing forward. Align the holes and attach two Bolts (4) and on the other ends of bolts attach two Big Curve Washers (6) and two Cap Nuts (5).
Page 14 ASSEMBLY Tool: 6mm Allen Wrench 2PCS 2. Handrails, Foot Bars and Rotation Rod Installation: Use the two 6mm Allen Wrenches to remove the two Pre-Assembled Bolts (19), two Spring Washers (20), two D Washers (21), and two Wave Washers (36) from the Rotation Rod (22).
Page 15 ASSEMBLY Tool: R for right bolt Important: Installing right bolt into right crank can only be done by turning right (clockwise). 6mm Allen Wrench 2PCS 8mm Allen Wrench Open-Ended Flat Wrench 3. Foot Pedal Support Bracket and Right Bolt for Crank Installation Attach the Foot Pedal Support Bracket (72) onto the right side of the right Foot Bar (11) with two Bolts (73), two Washers (74), and two Nylon Nuts (75).
Page 16 ASSEMBLY Note: In order to install the bolt properly, keep it perfectly straight when the bolt goes through the foot bar and the crank. If the bolt is connected to the crank at an angle, CORRECT damage to the bolt and/or the crank may occur. Please make sure the RIGHT bolt is for the RIGHT crank INCORRECT only and the LEFT bolt is for the LEFT crank only.
Page 17 ASSEMBLY Tool: L for left bolt Important: Installing left bolt into left crank can only be done by turning left (counterclockwise). 6mm Allen Wrench 2PCS 8mm Allen Wrench Open-Ended Flat Wrench 4. Foot Pedal Support Bracket and Left Bolt for Crank Installation Attach the Foot Pedal Support Bracket (72) onto the left side of the Foot Bar (11) with two Bolts (73), two Washers (74), and two Nylon Nuts (75).
Page 18 ASSEMBLY Note: In order to install the bolt properly, keep it perfectly straight when the bolt goes through the foot bar and the crank. If the bolt is connected to the crank at an angle, CORRECT damage to the bolt and/or the crank may occur. Please make sure the RIGHT bolt is for the RIGHT crank INCORRECT only and the LEFT bolt is for the LEFT crank only.
Page 19 ASSEMBLY Tool: Open-Ended Flat Wrench 5. Right and Left Foot Pedals Installation: Attach the Right Foot Pedal (23R) onto the right side of the Foot Bar (11) with two Bolts (24) and two Nylon Nuts (13). Tighten the Nylon Nuts (13) using the Open-Ended Wrench provided.
Page 20 ASSEMBLY Tool: 6mm Allen Wrench Open-Ended Flat Wrench 6. Right and Left Handrail Arms Installation: Step A: Insert the Right Handrail Arm (26) into the Right Handrail (9) and secure it using two Big Curve Washers (12), two Bolts (37), and two Cap Nuts (38). Tighten using the 6mm Allen Wrench and Open-Ended Flat Wrench provided.
Page 21 ASSEMBLY 7. Adjustable Levelers and Computer Installation: Step A : Computer Installation: Connect the Sensor Wire (31) to the Computer (32). Place the Computer (32) onto the plate of the Mainframe (1) and slide it down into the lock position. Step B: Adjustable Levelers Installation: Remove the Nut (68) from the Adjustable Leveler (67).
Page 22: Computer
COMPUTER SPECIFICATIONS: TIME ---------------------------------------------------- 00:00-99:59 MIN: SEC SPEED ------------------------------------------------- 0.0-999.9 MPH DISTANCE -------------------------------------------- 0.00-99.99 MILE CALORIES -------------------------------------------- 0.0-999.9 KCAL FUNCTIONS AND OPERATIONS: AUTO ON /OFF: The Computer will automatically turn on when exercise begins. After 4 minutes of inactivity, The Computer will automatically turn off. SCAN: Press the MODE button until the arrow points to SCAN, the computer will automatically scan through the functions every 6 seconds.
Page 23: Tension Adjustments
TENSION ADJUSTMENTS Tension Control Knob (34) Adjusting the Tension Control Knob To increase the tension, turn the Tension Control Knob (34) in a clockwise direction. To decrease the tension, turn the Tension Control Knob (34) in a counterclockwise direction. After prolong use of the elliptical trainer, the strap will begin to stretch out and it will become necessary to tighten the strap for optimum performance.
Page 24: Leveler Adjustments
LEVELER ADJUSTMENTS Adjusting the Rear Stabilizer End Cap or Adjustable Leveler The Elliptical has to be set up on a flat surface. Otherwise, shaking or wobble might occur during the workout. Use the following two methods to adjust the Elliptical Level. Adjustable Leveler (67) Rear Stabilizer End Cap (39) IMPORTANT: Follow these important steps to ensure the stability of the elliptical...
Page 25: Moving The Elliptical
MOVING THE ELLIPTICAL Transporting the Elliptical Hold the Handlebar (26) and pull the machine until the wheels on the Front Stabilizer (7) make contact with the floor. Push or pull the unit to the desired location, then gently lower the Rear Stabilizer (4) to the ground.
Page 26: Maintenance
MAINTENANCE Regular maintenance of your elliptical is necessary to extend the life of your machine and allow it to continue to function properly. Keep the elliptical, especially the computer console, out of direct sunlight to prevent screen damage or premature wear. Cleaning Keep the machine clean and free of any debris by vacuuming around the moving parts and wiping the machine down with a clean cotton cloth.
Page 27: Trouble Shooting
TROUBLE SHOOTING PROBLEM SOLUTION Check that the batteries are inserted properly with the correct polarity (see marking inside the battery compartment). The computer will not power up. Check that the battery springs are in proper contact with batteries. Remove the old batteries and replace with the new batteries.
Page 28: Warranty
WARRANTY MANUFACTURER’S LIMITED WARRANTY Paradigm Health & Wellness warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has be installed and operated in accordance with Paradigm’s Owner’s Manual.
Page 29: Parts Request Form
PARTS REQUEST FORM Paradigm Health & Wellness, Inc. EMAIL THIS FORM WITH YOUR RECIEPT OF PURCHASE TO Service@paradigmhw.com * NAME: _______________________________________________________ ADDRESS: ____________________________________________________ CITY ______________ STATE ______________ ZIP ___________________ TELEPHONE: (Day) _____________________________________________ (Night) ____________________________________________ SERIAL#: _____________________________________________________ MODEL#: _____________________________________________________ PURCHASE DATE: ______________________________________________ PLACE OF PURCHASE: _________________________________________ PART # DESCRIPTION...