Froware Upgrade- Touch Calibration LED Operation SD Card Format & Set breaking voltage Voice Guide Specification Parking mode event alarm Warranty SD Card format automatic alarm function Recording file error detection function How to display Front/ Rear screen WINYCAM BRAVO...
(This caution should shock or fire.) be applied when product is unused.) Do not touch the LCD excessive force as it may cause Do not use the product in places in high temperature/humidity. malfunction. WINYCAM BRAVO...
Page 4
LED is turned off, the last recording file may not be saved, so please be careful. When turn off the power of the body and remove the SD card before LED is turned off, the last recording file may not be saved, so please be careful. WINYCAM BRAVO...
사 typographical errors or omissions. 용 BRAVO is an auxiliary product to alert users for 하 safe driving and prevent accidents, by recording Contents of this User Manual may be modified, 기...
Security LED light are mounted on front body (LED Lighting connecting to a PC. function On/Off can be set in PC viewer / LCD menu) Each capacity of a normal / event/ motion folder can be set in PC Viewer. WINYCAM BRAVO...
※ Note : Please save PC Viewer program in advance in the computer, etc. so that the program can’t be deleted. (If the program is lost, please download from Winycam website.) The packaged product picture of the user manual may differ from the actual product.
Product Parts REC Button by manual Front Camera Power LEC MIC LED GPS LED Reset SD Card slot Security LED Rear Camera Connection GPS Connection TV-OUT Power Connection WINYCAM BRAVO...
SD card slot. connection of product. 하 (Check the SD card direction) 기 4. Attach the BRAVO in place on the 6. Arrange a power cable. 5. Connect cigar lighter to a cigar top of front windshield or middle o left socket.
Shutdown a vehicle battery and power off Remove a protect sticker and attach a rear After attached a rear camera, adjust an BRAVO first before installing a rear camera. camera in proper location in windshield. angle. Adjust angle is e right angle to lens (Disconnect the power connection) face or little downward facing.
GPS connection on at well visual place cable to the TV-Out cable to AV-IN jack your 사 BRAVO body. and tidy up a cable. jack on a BRAVO body. vehicle navigation. 용 하 기 Caution on GPS Installation Caution on TV-OUT Connection...
How to record 1. Record : BRAVO is automatically boot at power on, and a constant(normal) recording starts as an initial recording mode. 2. Recording Mode : it is classified into driving recording mode and parking (motion) recording mode 3. Recording Method : it is classified into a Normal recording, event recording, motion recording.
Red flashing interval at 0.5 sec (Including other error) High temperature Cut Red/Green flashing interval at 0.5 sec ※ Even though GPS signal dose not connect depends on GPS situation and location, GPS LED turn on Red lighting. WINYCAM BRAVO...
“The Recording will end.” Alarm tone in a Rear Camera disconnect “Ding-Dong, Ding-Dong” (the error for 2CH REC) ※ Only when event REC mode is set in the configuration, the voice guiding "event recording will start" will announce WINYCAM BRAVO...
(Event recording and other button) Cution - Make a sound Ding-Dong interval at 3 seconds during pop-up note, and if you don’t push any button for 10 seconds or push the button “No”, enter the Normal recording after pop-up note disappear. WINYCAM BRAVO...
Format is recommended for the stable REC continually. If you select “No” or nothing happens, pop-up note will disappear after 10 seconds and it will appear it after 1 hour. If you select “Ignore”, pop-up note will appear after 10 dyas. WINYCAM BRAVO...
Recording file error detection function When SD Card is removed forcibly or is damaged, an image will not be recorded normally. To protect it, this alarm will display to format SD Card when BRAVO detect error automatically. 사 용 하...
Front/Rear, Rear/Front, only Font, only Rear. Only LCD Screen looks different, 2CH images will be recorded when rear camera is connected. Rear Front Front Rear Front/Rear LCD Screen Rear/Front LCD Screen Rear Front Rear LCD Screen Front LCD Screen WINYCAM BRAVO...
Set REC Volume REC Volume Other Touch Calibration LCD Touch Screen Calibration Set SD Vehicle Capacity Rate by mode SD Card Adjustment Configuration Initialization Initialize Configuration Set Auto Change to Parking mode Parking Mode Change Display System Information System Information WINYCAM BRAVO...
③ Next Select file location and click “Next” Next ④ ⑤ ※ If viewer program is lost accidentally, please visit our website winycam-eng and download to the SD card Installing Complete installation WINYCAM BRAVO...
PC Original Viewer – Screen Configuration 2 3 4 5 6 사 용 하 기 13 14 15 16 19 20 WINYCAM BRAVO...
Page 22
Total File Time/Playback Time Playback File Location Brightness/Contrast/Chroma REC File List / Map Display GPS signal condition Playback Video Image Driving speed Playback Control Latitude/Longitude Full Screen G-sensor information Flip Horizontal Split image Flip Vertical File Skip Back WINYCAM BRAVO...
PC Original Viewer – Viewer Configuration 사 용 하 기 WINYCAM BRAVO...
Page 24
App Always Top Select App is always the top of another window. Video Reverse Video can reverse from side to side and up and down Product Model Select the model. Video adjustment Control playback speed Volume Control recording volume level WINYCAM BRAVO...
PC Original Viewer – Configuration 사 용 하 기 WINYCAM BRAVO...
Page 26
Adjust storage space ratio by recording Capacity Adjustment folder in the entire SD card storage capacity LCD Screen Select LCD screensaver function saver Setting Select a shock sensor sensitivity level G-Sensor (Level 1 is the most sensitive) Video Out Format Select TV-Out format WINYCAM BRAVO...
Breaking Voltage 12.0(24.0)V Color Middle Parking Mode Change Auto Movie SD Card Folder LCD Screen saver Settin 30 sec Capacity Motion Adjustment Video Out Format NTSC Event Driving/Parking mode LCD Video Format Front+Rear 5 (1: Most sensitive) G-Sensor Sensitivity WINYCAM BRAVO...
Window REC video playback window Former file Button Fast - Rewind Playback/Stop Button Playback/Stop REC file Next file Button Fast - Foward Front / Back Button Switch front / rear video image Back Button Back to file list WINYCAM BRAVO...
Page 29
2. Playback with Standard video player 1) Remove a SD Card from BRAVO 3) Playback Open a SD Card slot cover and press softly, Open a removal disc, you can see each folders. then a SD Card can be removed easily.
Page 30
P : Parking REC file list 3) Original Viewer Program Click icon for the original viewer 4) Find a REC file location Click “FILE LOCATION” in original viewer on upper right. Choose file location, video file list will be shown WINYCAM BRAVO...
Page 31
Please check the TV/Vehicle navigation supplier for an external monitor cable. Mode change method is different for each modes, please refer user manual of TV/Vehicle navigation. Note If remove or insert TV Out cable during recording, recording will end and start reboot. WINYCAM BRAVO...
2. Go to the folder where recorded video files are stored. 3. Create the new folder in same location. 4. Drag the particular file to the new file to copy. (If you drag a folder, the whole folder will be copied.) WINYCAM BRAVO...
By mode : Total record files are stored by your setting rate on “SD card Folder Capacity Adjustment” When memory is full on a particular recording mode, the oldest file will be automatically deleted on Note particular recording mode. Stored file may also be deleted. WINYCAM BRAVO...
How to separate video 1. Press “Front & Rear Extract” button on the original PC viewer program. 2. Select a video file to separate and click “OK” button. 3. Stored separated file in “C:\Program Files\BlackBoxViewer\BlackBoxViewer\Video” WINYCAM BRAVO...
5) Insert the SD card to BRAVO. After power ON then firmware will be updated automatically. 6) During firmware updating, a voice guide will be announced and updating massage will be displayed ion LCD. 사 7) When the firmware update is completed, BRAVO will be initialized and a voice guide will be announced 용 하...
RESET : Go back to a test calibration it will be initialized and loading screen will be shown. Keep pressing screen. REC button, a calibration button can be skipped. Note CANCEL : uncompleted a calibration and turn to Normal REC mode. WINYCAM BRAVO...
기 work correctly. We recommend allocated value 32KB when you format a SD Card. 2) Format on BRAVO Format a SD Card on a device. (Menu > Others > SD Card Format) 2. How to install Constant power discharge protection function...
1CH : Super High / High / Normal (bitrate 8/6/4Mbps - HD Standard) Operating Image Quality 2CH : Super High / High / Normal -20℃ ~ +70℃ Temperature (Front : bitrate 4/3/2Mbps – HD Standard Rear : bitrate 2/2/2Mbps) WINYCAM BRAVO...
5. The product does not recognize the SD card. 용 ※ Remove the SD card from BRAVO after power OFF, and check for any foreign material or abnormality around the connecting 하 terminal. Format the SD card and try again. If the SD card is old, please replace to a new one.
Page 40
3. If the warranty period has passed, we will repair by paid charge. 4. Please take this “Warrantee” when you request repair. 5. Please keep this “Warrantee” because we will not be able to re-issue this warrantee note. Model Name BRAVO Product Vehicle Drive Recorder / Rear Camera Serial No...
Need help?
Do you have a question about the BRAVO and is the answer not in the manual?
Questions and answers