Page 2
Thank you for choosing a Free The Tone product. In order to take full advantage of the features and performance it provides, please read this Main Features of FT-1Y owner’s manual thoroughly, and keep it in a safe place for future reference.
Page 4
• FEEDBACK: When the FEEDBACK LED is illuminated, t SUBDIVISION/OFFSET Section i Other Features • TRAIL: This function switches to the new preset while the feedback amount is indicated. This amount can be set • SUBDIVISION: When the SUBDIVISION LED is •...
Page 5
1Y’s preset will be switched. The MIDI channel on the device sending the program change number and the MIDI channel on the FT-1Y must be matched. If the FT-1Y’s MIDI channel is set to Omni ([AL]), it will accept program change numbers HOW TO USE FT-1Y on all of the MIDI channels and switch its preset accordingly.
(REC) footswitch connected to the terminal on the rear panel when you want to enter a Tapped tempo. Or, according to RATE-DOWN off = 0, 1–99 your application, while keeping the main unit of the FT-1Y on the pedal board, you can place the footswitch for tap-enter DEPTH off = 0, 1–99 operation at a place where you can easily step on it.
Need help?
Do you have a question about the FT-1Y and is the answer not in the manual?
Questions and answers