Rf Exposure - Zte smart first 7 User Manual

RF exposure

Your phone contains a transmitter and a receiver. When it is ON,
it receives and transmits RF energy. When you communicate
with your phone, the system handling your call controls the
power level at which your phone transmits.
Specific absorption rate (SAR)
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines were
developed by the independent scientific organization ICNIRP and
include safety margins designed to assure the protection of all
persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0
W/kg and the highest SAR value for this device when tested at the
ear was 0.58 W/kg and when tested near the body (at a distance
of 15 mm) the highest SAR value was 0.72 W/kg.
As mobile devices offer a range of functions, they can be used
in other positions, such as on the body as described in this user
guide. As SAR is measured utilising the device's highest
transmitting power, the actual SAR of this device while
operating is typically below that indicated above. This is to
ensure it only uses the minimum power required to
communicate with the network.
Body worn operation
Important safety information regarding radiofrequency
radiation (RF) exposure. To ensure compliance with RF exposure
guidelines the phone must be used with a minimum of 1.5 cm
100