Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Dynaphos Starter SK-200
- Page 1 INSTRUCTION MANUAL Starter SK-200 studio flash www.dynaphos.com...
- Page 2 Savety Thank you for choosing DYNAPHOS studio lighting equipment! Before you proceed further, please read the instruction manual. Use of this product requires basic photographic knowledge and habits. Attention! Please, follow the savety instructions! • Starter lighting equipment is designed for photo amateurs and it’s not suitable for professional work, as also as any kind of intensive use! •...
- Page 3 Guide back panel over view Photoeye; Digital display; Modeling lamp button; Slave mode button; USB sync port; Sync cord jack; Umbrella fixing screw; Flash and modeling lamp output controller; Sound заден панел button; “Test” button; Power switch; Fuse; AC power socket; Umbrella holder;...
- Page 4 Guide Mounting the flash and preparing to work pic. 1 pic. 2 pic. 3 Mount the flash on a light stand and fix it through the screw (see p. 2). Adjust the horizontal angle and secure the handle 18. To take down the protective cap or mounted accessory, hold down the front fit release button turn the accessory counterclockwise and pull it forward (pic.1).
- Page 5 When working with light control accessories such as spots, which are preventing the cooling, you have to limit the modeling light use and the flash shouldn’t be used too intense. If the flash is used carelessly about its temperature this may cause failure, in which case Dynaphos Ltd. reserves the right to refuse warranty repair.
- Page 6 Guide Sync triggering Plug the sync cable or connect the flash trigger receiver in the usb port jack (see p. 2) Connect the sunchro cable or the receiver with the camera and set the camera on the max. shutter speed. (check the camera manual instructions) When pressing the camera shutter release, simultaneously the flash will fire an impulse.
- Page 7 - the transmitter is designed for different models lightning. To work with Starter SK-200, hold down the button “Set” 4 until the screen display number 1.0 - when pressing a button the indicator must flash, if this don’t hap-...
-
Page 8: Technical Specifications
2nd flash, IR, USB for FT-16 wireless and power control trigger Cooling active Sync voltage Operating voltage 195-250V/50-60Hz Dimensions 290x215x175 mm (without reflector) Weight 1.4 kg Product number 010325 www.dynaphos.com Sofia 1700, Proff. Alexander Foll 2, Entr. 8, Shop 1 Tel: 02/ 4901 555; email: info@dynaphos.com...
Need help?
Do you have a question about the Starter SK-200 and is the answer not in the manual?
Questions and answers